Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement corner parking light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
    • Fender Mounted
  • Replaces dealer part number: 81520-0C030, 815200C030
  • Direct replacement
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Built to strict quality control standards

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Changing the Headlight Bulbs (0:55)
    • Reach down behind the headlight and pull the connector from the headlight.
    • Remove the rubber boot.
    • Push the retainer in and up.
    • Pull the bulb free.
    • Put the new one in place and put the retainer in and down.
    • Replace the rubber boot.
    • Reconnect the harness.
  2. step : Removing the Headlight Assembly (2:28)
    • Remove the Phillips clip above the side light.
    • Pull the side light forward and out.
    • Disconnect the connectors on the back of the side light.
    • Remove the four 10mm bolts securing the headlight.
    • Disconnect the connecter and pull the headlight up and out.
  3. step : Replacing the Headlight Assembly (4:48)
    • Line up the new headlight and slide it into place.
    • Replace the four 10mm bolts.
    • Reconnect the harness.
    • If you need to adjust the headlight angle do it before replacing the side light.
    • Reconnect the side light.
    • Line it up and push it in to place.
    • Replace the Phillips clip above the side light.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2007Toyota Sequoia Toyota Sequoia Corner Light Driver Side
2005-2006Toyota Tundra Toyota Tundra Double Cab Corner Light Driver Side
Part #: 1ALPK01021


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:59 min)