Replaces

Toyota Sequoia Tundra Brake Kit Nakamoto CD976, 31267-DSZ - 1APBS00306

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part number: 43512-0C011, 435120C011
  • Fits 6 Lug Wheel
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
2005 Toyota Sequoia
Very impressed first with the packaging. Great product. Fits like Original equipment. Best of all it stops on a dime. No shudder at all From now on you have all my business. Plus free shipping. It’s a win win ! Thanks again !
January 13, 2018
Purchased
1 month ago
great service and fast shipping!
product is exactly as described and a great value. Fast free shipping a plus.
May 11, 2017
Purchased
9 months ago
Great set up
Easy installation, but missing break in instructions.
June 28, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Will these fit with caliber casting s13we ?
Brian B on Nov 30, 2017
BEST ANSWER: Thanks for your question! We don't have caliper casting fit info for these items. They are at least guaranteed to fit the vehicles they are listed for. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.

How-to Video:

(11:57 min)

Tools List:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket



This part replaces:

  • Nakamoto CD976, 31267-DSZ

Vehicle Fit

  • 2003 Toyota Sequoia Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 5.3 Inch Front Pad Length Performance Nakamoto
  • 2004-2007 Toyota Sequoia Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated Performance Nakamoto
  • 2000-2003 Toyota Tundra Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 5.3 Inch Front Pad Length Performance Nakamoto
  • 2003-2006 Toyota Tundra Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated Performance Nakamoto
Part #: 1APBS00306

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD976, 31267-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More