Replaces

Toyota Lexus Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit - 1APBS00029

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      5 Lug
      11.65 in. (296mm)
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Brake Pad Lubricant Included:   Includes Brake Pad Contact Point Grease
  • Brake Pad Hardware Included:   Includes Brake Pad Hardware
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheels
  • Vented
  • 11.65" (296 mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:24)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:14)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside and hang it by bungee cord
    • Remove the wires
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:39)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Installing the New Brake Rotor (4:03)
    • Clean the hub with a wire brush
    • Clean both sides of the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
  5. step : Installing the New Brake Pads (4:52)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the bolts
    • Tighten the bracket bolts to 79 foot-pounds of torque
  6. step : Reattaching the Wheel (8:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Press on the hub cap
  7. step : Testing the Brakes (9:07)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Dead Blow Hammer

4.20/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
1
Shipment
I love how quickly my product comes. It’s awesome thx so much
October 5, 2017
High quality with cheap price, Great !
Comparing to the parts available in the market, they are one of the best, and prices are more cheaper.
October 12, 2018
The brake kit of my 2012 Toyota Camry Le
The product is very good quality! Before I bought two time in other stores are no good for the quality! But this time I buy fo 1A auto part the product is very good and so smooth when I use it in my car!
May 9, 2019
Noisy breaks
I purchased these thinking they were the top of the line. They are the noisiest break I’ve ever had on a vehicle and will not be purchasing them again.
July 18, 2019
New brakes work great
I was tired of replacing the regular brakes every 15k miles due to vibration. So far, these drilled brakes are working fine and Im hoping will last alot longer. Theyre supposed to, so well see.
November 26, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2013-2017Lexus ES300h Lexus ES300h Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007-2017Lexus ES350 Lexus ES350 Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2008-2016Toyota Avalon Toyota Avalon Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007Toyota Camry Toyota Camry (Japan Built Models (1st VIN Digit J)) Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007-2017Toyota Camry Toyota Camry Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
Part 1APBS00029
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12059