Replaces

Toyota Lexus Front Lower Control Arm with Ball Joint Pair - 1ASFK01969

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

This replacement front lower control arm pair is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side) FRONT LOWER
  • Includes lower ball joints
  • Includes bushings
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:25)
    • Raise the vehicle with minimal weight on the wheel
    • Loosen the six 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the six lug nuts
    • Remove the wheel
  2. step : Removing the Lower Control Arm (1:20)
    • Remove the four 12 mm bolts to remove the front skidplate
    • Remove the tie rod end cotter pin
    • Remove the 19 mm tie rod end castle nut
    • Hammer the knuckle to loosen the tie rod end, then remove the tie rod end
    • Remove the two 19 mm lower ball joint bracket nuts
    • Remove the lower ball joint cotter pin
    • Loosen the 24 mm lower ball joint castle nut
    • Turn the knuckle away and secure it so prevent the CV joints from separating
    • Separate the lower ball joint bracket from the ball joint using a pickle fork and hammer
    • Remove the nut and lower ball joint bracket
    • Loosen the 19 mm nut and 19 mm bolt at the strut bottom
    • Remove the 19 mm nut from the 19 mm forward camber bolt, then remove the washers and bolt
    • Remove the 19 mm nut from the 19 mm rearward camber bolt, then remove the washers and bolt
    • Remove the 19 mm lower strut bolt
    • Remove the lower control arm
  3. step : Installing the Lower Control Arm (25:00)
    • Insert the lower control arm into the mounting brackets
    • Install the forward 19 mm camber bolt with washer
    • Install the rearward 19 mm camber bolt with washer
    • Install the 19 mm nut with washer on each camber bolt
    • Insert the lower strut mount into the control arm
    • Install the 19 mm lower strut bolt and 19 mm nut
    • Torque all three nuts to 100 ft-lb
    • Untie the knuckle
    • Install the lower ball joint bracket onto the lower ball joint
    • Install the 24 mm lower ball joint castle nut by hand
    • Align the lower ball joint bracket with the knuckle
    • Install the two 19 mm lower ball joint bracket bolts
    • Install the tie rod end into the knuckle
    • Install the 21 mm tie rod end castle nut
    • Torque the 19 mm ball joint bracket bolts to 118 ft-lb
    • Torque the 24 mm ball joint castle nut to 118 ft-lb, then continue tightening to align the castle nut with the cotter pin hole, if necessary.
    • Install the ball joint cotter pin and peen it over
    • Install the 21 mm tie rod end castle nut, and torque it to 67 ft-lb, then continue tightening to align the castle nut with the cotter pin hole, if necessary
    • Install the tie rod end cotter pin and peen it over
    • Install the forward skidplate, starting with the mounting hooks, and secure it with the four 12 mm bolts
  4. step : Installing the Wheel (33:27)
    • Install the wheel onto the wheel studs
    • Install the 21 mm lug nuts and tighten them by hand in a crossing pattern
    • Lower the vehicle with minimal weight on the wheel
    • Torque the 21 mm lug nuts to 85 ft-lb in a crossing pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Pliers
  • Side Cutters

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 24mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Pickle Fork
  • Blowtorch

  • Wrenches - Metric

  • 19mm Wrench

4.71/ 5.0
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
0
0
0
Great product
Great pricing and very fast delivery would use them again and have told several friends about their site as well. Cant see any difference from the parts I got and the OEM ones on my truck.
March 16, 2017
04 4runner
Nice fit and finish on these and a great deal for the price longevity remains to be seen, overall very happy
February 2, 2018
Seem ok!
These look just like Toyota OEM, time will tell how they hold up. Only gave 4 stars because the box they were shipped in was pretty crappy. It was completely destroyed by the time it got to my front door and there was basically no protection in the inside but with that said nothing seemed to be damaged. Great price though
May 12, 2018
Upper and lower control arms with ball joints
Lower ball joints at driver side needed replacement... Because of the reasonable parts price with 1A... I decided to replace the four front control arms with bushings and ball joints... The parts were a perfect fit.
March 18, 2019
lower control arm; 04 Toyota 4Runner 4x4
it did the trick.. can’t complain.. a good replacement part. Good for daily driving and light off road (fire roads). Don’t expect to go rock crawling with these. It’s an OEM replacement lower control arm.
June 26, 2019
Fit just fine
Price was good shipping was good and fit was good. Highly suggest getting the Moog greasable bolts that go in the bushings on the frame. Grease the heck out of those and install those with these new arms and youll be good to go. The only reason for the four star rating is because 1A Auto put me on their emailing list that I didnt ask for and they keep asking me to write reviews. I just want to buy a product get it shipped and be done. Otherwise no issues.
September 14, 2019
Great product!
Thanks 1a! Parts fit my fj cruiser perfectly! Super fast shipping too!
November 13, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
My GX 470 has the height adjusting feature will these fit My GX470?
Michael T June 1, 2018
They will if your control arms are the same part number.
Bret W June 1, 2018
Who makes this arms? What’s the brand?
Rafael I March 27, 2019
1A Autos house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicles exact OEM specifications.
Emma F March 27, 2019
This this come with driver and passenger lower control arm? And how long will this last me?
Manuel M April 8, 2019
Yes it does. And so far 2 years strong in a lifted vehicle.
P A April 8, 2019
This will come with both the driver and passenger side and it should last you for the lifetime of your vehicle.
Emma F April 8, 2019
Yes I bought the same thing and it came with everything and fit perfect and had no issues at the alignment shop. I have had mine for 2 years so far but my passenger balljoint is worn and needs replaced. Drivers side is good so far though. Hope this helps
R V April 8, 2019
What is the brand name of these control arms?
Mario P August 1, 2019
1A Autos house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicles exact OEM specifications. Please let us know if you have any other questions.
Emma F August 1, 2019
These control arms are from our 1A Auto in-house brand. We have all of our parts manufactured to exact OE specifications, so they will fit and function just like the original parts that came on your vehicle. These will also be covered by a limited lifetime warranty, so if for some reason they fail under intended use, we will send a replacement part at no extra charge. Please contact us if you have any further questions.
Anthony C August 1, 2019
Year Make Model Description
2003Lexus GX470 Lexus GX470 Front Lower Control Arm with Ball Joint Pair
2004-2009Lexus GX470 Lexus GX470 without Adaptive Suspension Front Lower Control Arm with Ball Joint Pair
2003-2009Toyota 4Runner Toyota 4Runner Front Lower Control Arm with Ball Joint Pair
2007-2009Toyota FJ Cruiser Toyota FJ Cruiser Front Lower Control Arm with Ball Joint Pair
Part 1ASFK01969
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.