This replacement Toyota Highlander tail light is just what you need to get your Toyota in good looking form again!

Specifications:

  • Left Hand Driver side
  • Replaces dealer Part Number: 81561-48090
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Toyota Highlander tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:20)
    • Push the two latches on the trim door in the rear hatch
    • Remove the trim door
    • Remove the tail lamp assembly
    • Unplug the audio connector
    • Pull the harness out of the socket
    • Remove the 10mm nut from the socket
    • Press the tabs on the socket
    • Pull out the tail light assembly
    • Disconnect the wiring harness
    • Remove the tail lamp assembly
  2. step : Installing the Tail Light (1:48)
    • Connect the wiring harness
    • Clip the tail light into the vehicle
    • Tighten the 10mm bolt to the socket
    • Plug in the marker light
    • Click the lock into place
    • Push the lamp into the body

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
0
0
1
Won't fit properly
The time installed nicely but after a few days the lights stopped working. Since it's an after market part the connections for the lights won't sit the way it should. Just go to a junk yard and pull one off yourself. Videos online are easy to find for how to do that.
June 18, 2017
Purchased
1 year ago
Response from 1A Auto
Hello, Josh! I am sorry to hear that you were unsatisfied with the part you ordered from us, and we would like the chance to make it right. Please give us a call at 888-844-3393 so we can set up a replacement or refund!
June 19, 2017
Tim KStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Toyota Highlander Tail Light Driver Side
  • 2006-2007 Toyota Highlander (excluding Hybrid Models) Tail Light Driver Side

This part replaces:

  • Partslink TO2818120
  • Hollander 166-59784L
  • OE # 8156148090
  • TYC 11-6054-01-1
  • DEPO 312-1953L-UF
Part #: 1ALTL00497

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:00 min)