Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

 

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Loosen the lug nuts with a 21mm deep socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:33)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 14mm slide bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (4:40)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    • Or tighten a tap or M13 bolt into the holes to loosen the rotor
  4. step : Preparing the New Brake Pads and Rotors (9:35)
    • Spray the hub with brake parts cleaner
    • Clean off the hub with a wire brush
    • Clean the brake pad slides with a wire brush
    • Clean the caliper bracket with brake parts cleaner and a wire brush
    • Apply grease to the caliper slides
    • Clean the rotor with brake parts cleaner
    • Apply copper anti-seize to the hub
  5. step : Installing the New Brake Rotor (15:14)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Apply copper anti-seize to the caliper bracket bolts
    • Start the bolts by hand
    • Tighten the bolts to 79 foot-pounds of torque
  6. step : Installing the New Brake Pads (16:34)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (21:23)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (23:27)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle
  9. step : Checking the Brake Fluid (23:03)
    • Twist the brake fluid reservoir cap off counterclockwise
    • Check the brake fluid level, using a flashlight if necessary
    • Check that the brake fluid is between the minimum and maximum lines
    • Check that the brake fluid is clear or an almost yellow color
    • If the brake fluid is murky or dark, drain and refill it
    • Twist the brake fluid reservoir cap on clockwise

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • Complete SAE Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Toyota Highlander Toyota Highlander Front Premium Posi Ceramic Brake Pads
2006-2007Toyota Highlander Toyota Highlander Front Premium Posi Ceramic Brake Pads (excluding Hybrid Models)
Only 3 left in stock
Part #: 1ABPS02477


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(23:51 min)