Replaces

Toyota CV Axle Shaft Pair A1 Cardone 66-5245, 66-5247 - CAACS00020

These axle shafts are new, aftermarket parts. They are just what you need to get your vehicle in good working order!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • CV Style Axle Shafts
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charges
  • Correct for models with or without ABS (Anti-Lock Brakes)

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Note: This is for a pair of axle shaft assemblies.

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:28)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (1:16)
    • Insert a punch and hit with a hammer to separate the axle nut
    • Have an assistant hold the brakes
    • Loosen the nut with a 30mm twelve-point deep socket
    • Remove the nut and thread it on a few turns
  3. step : Separating the Tie Rod (2:57)
    • Straighten the cotter pin in the castle nut
    • Remove the cotter pin
    • Loosen the castle nut with a 17mm box wrench
    • Use a ball joint separator to separate the ball joint
    • Pull the tie-rod out of the knuckle
  4. step : Removing the CV Axle (4:08)
    • Remove the three 17mm bolt from the control arm
    • Pull the control arm off the knuckle
    • Tap the axle out of the knuckle
    • Remove the axle nut
    • Separate the axle out of the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  5. step : Installing the CV Axle (7:02)
    • Insert the CV axle into the transmission
    • Tap the axle into the transmission with a dead blow mallet
    • Insert the axle into the knuckle
    • Tighten the axle nut by hand
    • Insert the control arm to the knuckle
    • Tighten the 17mm bolts to the control arm by hand
    • Tighten the 17mm bolts with a socket and ratchet
    • Tighten the 17mm bolts to 55 foot-pounds of torque
  6. step : Reinstalling the Tie Rod (9:38)
    • Insert the tie rod into the knuckle
    • Tighten the castle nut with a 17mm socket and ratchet
    • Insert the cotter pin
    • Bend the end down with needle nose pliers
  7. step : Reinstalling the Axle Nut (10:21)
    • Have an assistant hold the brake pedal down
    • Tighten the axle nut by hand
    • Torque the axle nut to 217 foot-pounds
    • Stake the axle nut with a punch to bend the nut into the groove
  8. step : Reattaching the Wheel (11:21)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Floor Jack
  • Assistant

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Quality
Super fast Shipping Quality Product A++++ Will use again
January 31, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
DOES THIS INCLUDE BRACKET AND SNAP RING?
Nathan on Jan 31, 2018
BEST ANSWER: Thanks for your question! You will receive only the parts that are pictured if you purchase these parts. Thank you!

How-to Video:

(12:38 min)

Tools List:

    General Tools

  • Jack Stands
  • Center Punch
  • Floor Jack
  • Assistant

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket



This part replaces:

  • A1 Cardone 66-5245, 66-5247

Vehicle Fit

  • 2002-2009 Toyota Camry Front CV Axle Shaft L4 2.4L Pair A1 Cardone 66-5245, 66-5247
  • 2001-2007 Toyota Highlander 2 Wheel Drive Front CV Axle Shaft L4 2.4L Pair A1 Cardone 66-5245, 66-5247
  • 2004-2006 Toyota Solara Front CV Axle Shaft L4 2.4L Pair A1 Cardone 66-5245, 66-5247
  • 2007-2008 Toyota Solara Front CV Axle Shaft L4 2.4L with Manual Transmission Pair A1 Cardone 66-5245, 66-5247
Only 5 left in stock
Part #: CAACS00020

Ships Same Day for orders placed by 4 P.M. ET

A1 CARDONE
Brand #: 66-5245, 66-5247

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More