This replacement Toyota Corolla tail light is just what you need to get your Toyota in good looking form again!

This tail light features:

  • Right Hand Passenger side
  • Replaces dealer Part Number: 81550-02290
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Toyota Corolla tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : To service the bulbs (0:55)
    • Pop the trunk and pull out the little section of padding.
    • Twist and pull out the bulbs to service them.
  2. step : Remove the tail light assembly (1:30)
    • Untwist the plastic thumb screw anchoring the trunk padding.
    • Pull the trunk padding back.
    • Remove the three 10 mm bolts and unplug the wiring harness.
    • Pull the tail light assembly out.
    • Swap your bulbs to the new tail light assembly.
    • Remove the old gasket.
  3. step : Install the new tail light assembly (2:30)
    • Put the new tail light seal gasket in place.
    • Place the tail light assembly into its mounting
    • Plug in the wiring harness
    • Use a 10 mm socket and ratchet to bolt down the tail light assembly.
    • Replace the trunk padding and screw in the thumb screw.
    • Tuck the bulb padding panel back into place

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Toyota Corolla (Built After 5/04 Production Date) Tail Light Passenger Side
  • 2005-2008 Toyota Corolla Tail Light Passenger Side

This part replaces:

  • Partslink TO2801154
  • Hollander 166-59397BR
  • OE # 8155002290
  • TYC 11-5703-90-1
  • DEPO 312-1942R-AF-PR
Part #: 1ALTL00557


How-to Video:

(04:17 min)