Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Kit Includes: (2) Parking Lights
  • Kit Includes: (2) Headlights
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:56)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:57)
    • Pop the hood and secure.
    • Reach behind the headlight assembly
    • Twist and pull to remove the bulb.
    • Unclip bulb from the harness.
    • Reverse the process to install the new bulb.
  3. step : Remove the front grille. (2:20)
    • Lift the hood.
    • Remove the three Phillips screws securing the front grille.
    • Unclip the front grille and set aside.
  4. step : Remove the parking light assembly. (3:00)
    • Remove the one Phillips screw.
    • Pry out the parking light assembly
    • Unplug the bulb/harness.
  5. step : Remove the headlight assembly (3:40)
    • Unbolt the two nuts and 1 bolt securing the headlight assembly using your socket, ratchet and extension.
    • Unclip the harness.
  6. step : Install the new headlight assembly (4:45)
    • Plug the harness into the new head light assembly.
    • Line up the headlight assembly.
    • Bolt back in using your 10 mm socket, extension and ratchet.
  7. step : Install new parking light assembly (6:20)
    • Plug in bulbs and harness.
    • Line up and clip in parking light assembly.
    • Screw in the Phillips screw.
  8. step : Remount the front grille. (7:20)
    • Clip the front grille in.
    • Screw in the 3 Phillips screws.
    • Close hood.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Replacement Headlights and Sidelights for 1997 Corolla
Ordering and paying by telephone was quick and easy.
All of the lights shipped quickly, were easy to track, and arrived within a few days.
The lights fit, though maybe not as well as the originals.
I did not like the plastic screw-in fitting for the headlight bulbs. It was hard to firmly seat the bulbs, and looked like it would not hold up well to several rounds of replacing the bulbs. Overall experience very positive.
April 23, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993 Toyota Corolla 2 Wheel Drive 4 Piece Set Lighting Kit
  • 1994-1997 Toyota Corolla 4 Piece Set Lighting Kit

This part replaces:

  • OE # 81150-1A491
  • OE # 81110-1E221
  • OE # 8111081620
  • TYC 20-1745-00-1
  • TYC 20-1744-00-1
  • TYC 18-1921-00
  • TYC 18-1920-00
  • Hollander 114-58337
  • Hollander 114-58337L
  • Partslink TO2503107
  • Partslink TO2502107
  • Partslink TO2550106
  • Partslink TO2551106
Part #: 1ALHT00057

How-to Video:

(08:12 min)