Replaces

Toyota Corolla Corner Light Passenger Side - 1ALPK00163

This replacement Toyota Corolla corner parking light is just what you need to get your Corolla in good looking form again!

Specifications

  • RH (passenger's side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts in the fender
  • Does not include bulbs or wiring

This Toyota Corolla corner parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:56)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:57)
    • Pop the hood and secure.
    • Reach behind the headlight assembly
    • Twist and pull to remove the bulb.
    • Unclip bulb from the harness.
    • Reverse the process to install the new bulb.
  3. step : Remove the front grille. (2:20)
    • Lift the hood.
    • Remove the three Phillips screws securing the front grille.
    • Unclip the front grille and set aside.
  4. step : Remove the parking light assembly. (3:00)
    • Remove the one Phillips screw.
    • Pry out the parking light assembly
    • Unplug the bulb/harness.
  5. step : Remove the headlight assembly (3:40)
    • Unbolt the two nuts and 1 bolt securing the headlight assembly using your socket, ratchet and extension.
    • Unclip the harness.
  6. step : Install the new headlight assembly (4:45)
    • Plug the harness into the new head light assembly.
    • Line up the headlight assembly.
    • Bolt back in using your 10 mm socket, extension and ratchet.
  7. step : Install new parking light assembly (6:20)
    • Plug in bulbs and harness.
    • Line up and clip in parking light assembly.
    • Screw in the Phillips screw.
  8. step : Remount the front grille. (7:20)
    • Clip the front grille in.
    • Screw in the 3 Phillips screws.
    • Close hood.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:12 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • OE # 8161012600
  • Partslink TO2551106
  • TYC 18-1920-00
  • DEPO 312-1505R-AS

Vehicle Fit

  • 1993 Toyota Corolla 2 Wheel Drive Corner Light Passenger Side
  • 1994-1997 Toyota Corolla Corner Light Passenger Side
Part #: 1ALPK00163

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More