Replaces

Toyota Camry Solara Strut & Spring Assembly - 1ASFK00096

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:14)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:37)
    • Remove the 12mm bolt from the brake line
    • Remove the 10mm bolt from the ABS sensor
    • Pull the brake line off the strut
    • Pull the ABS sensor off the strut
    • Attach locking pliers to the upper sway bar ball joint
    • Remove the lower sway bar link nut with a 14mm socket and ratchet
    • Remove the sway bar link from the strut
    • Remove the two 19mm nuts and bolts that connect the strut to the wheel spindle
    • Lift the rear seat off its ancho points
    • Push the seat belts through the rear seat cushion
    • Pull the rear seat out through the door
    • Remove the 12mm bolt from each rear seat bolster
    • Pull out the rear seat bolsters
    • Pull the seatbelt aside
    • Pull back the sound-deadening material
    • Remove the three 12mm bolts from the top of the strut
    • Pull the strut down and out
  3. step : Installing the Strut (5:44)
    • Lift the strut into place, lining up the studs
    • Start the 13mm nuts onto the strut mount
    • Insert the 19mm bolts that connect the strut to the wheel spindle
    • Start the 19mm nuts onto the bolts
    • Tighten the 19mm nuts to 83 foot-pounds of torque
    • Put the ABS sensor bracket into place
    • Insert the 10mm bolt into the ABS sensor bracket
    • Put the brake line into place
    • Insert the 12mm bolt into the brake line bracket
    • Put the sway bar link into place
    • Attach locking pliers to the upper sway bar ball joint
    • Fasten the 14mm nut onto the sway bar link
  4. step : Reattaching the Wheel (7:31)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. step : Securing the Strut and Reinstalling the Rear Seat (8:08)
    • Fasten the three 13mm nuts onto the strut mount
    • Push the rear seat bolsters into place using the locating tabs
    • Insert the 12mm bolt into each rear seat bolster bracket
    • Push the rear seat cushion into place
    • Pull the seatbelts through the rear seat cushion
    • Pop in the seat cushion clips

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket
  • 12mm Socket
  • 13mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 14mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 12mm Wrench

4.9 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
14
1
0
0
0
My new favorite auto parts store
Product was quality at a great price and shipping was fast. Will check first with 1A for all parts. Installation videos are the best. The only thing I'd add is videos on tips of how to get old parts off. Ex: i had to use a torch and needle nose vice grips to remove sway bar from old shocks.
April 20, 2017
Purchased
11 months ago
Easy like Sunday morning.
Could not have been easier thanks to the video. And rides good.
March 6, 2017
Purchased
1 year ago
Awesome! my camry ride is like a new car. Thanks again
October 20, 2017
Purchased
4 months ago
1999 Camry easy strut swaps
Watched the YouTube video and walked me through step by step. Assemblies bolted right in and had new hardware. Ride is amazing. Couldn't get parts cheaper anywhere without the springs!
August 27, 2017
Purchased
6 months ago
Great struts!
Would be 5 stars if the rear mounting bolts were factory length. I like the product and do not regret the purchase at all. Installation of the front was a breeze with a good set of tools, a lift, and some sense. The back was straight forward and simple for the most part but the mounting bolts located in the interior of the car at the top of the strut assembly were a little longer than the factory ones which made it a little more difficult and time consuming because of the limited space to work with but I managed to get them tightened and then took a trip from Tupelo, ms to panama, Florida. At first they were very rigid which I expected but by the time I made it home to Tupelo after a week in Florida they seemed to be much more forgiving with a smoother ride but still very supportive. These struts made my car handle like a new one and it's a 1998 Camry, if they last I would definitely recommend 1aauto full strut assemblies to anyone who needs struts and wants to do it themselves or even if they have someone to install them for them. For the price of this full assembly I am 100% satisfied especially when compared to a full assembly of oem struts from Toyota which would have been more than $800 in parts alone.
July 11, 2017
Purchased
7 months ago
perfect fit
the struts fit like a glove. the car rides smooth and there is no more bounce.
August 28, 2017
Purchased
6 months ago
Great product
Bought this product for my 1999 Toyota Camry and it fits perfectly.
December 9, 2017
Purchased
2 months ago
1998 Camry strut spring assembly
I installed all 4 assemblies in 4 hours. The video was very helpful. Great improvement to handling and stance. Took about a week for springs to settle in, but now the car sits about 2 inches higher than the tired old ones and doesn't feel like it's wallowing or bottomed out all the time. Wish I'd done it years before.
October 23, 2017
Purchased
5 months ago
1st time user of 1A-Auto
Easy to use web site. Quick shipping and great easy to follow videos on how to remove and install.
July 10, 2017
Purchased
7 months ago
Camry Struts
The struts arrived quickly and free shipping was a real plus. After watching the instillation video from 1AAuto the job was fairly simple.
December 15, 2017
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Will these assemblies fit on a 1998 Toyota Camry LE V6?
Andrew K on Sep 14, 2017
BEST ANSWER: No, these will only fit the 2.2L 4 cylinder models only.
How much for the posted to the UK?
Arnie on Mar 29, 2017
BEST ANSWER: We do not ship internationally through the website, you will have to visit our eBay page to get rates if applicable!

How-to Video:

(09:40 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket
  • 12mm Socket
  • 13mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 14mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 12mm Wrench



This part replaces:

  • Monroe 181678
  • Monroe 181679
  • Monroe 181681
  • Monroe 181680
  • Monroe 171678
  • Monroe 171679
  • Monroe 171681
  • Monroe 171680
  • KYB SR4029
  • KYB SR4030

Vehicle Fit

  • 1997-2001 Toyota Camry Front & Rear Strut & Spring Assembly 4 Piece Set L4 2.2L
  • 1999-2003 Toyota Solara Front & Rear Strut & Spring Assembly 4 Piece Set L4 2.2L
Part #: 1ASFK00096

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More