Replaces

Toyota Camry Solara Strut & Spring Assembly Pair - 1ASSP00004

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:14)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:37)
    • Remove the 12mm bolt from the brake line
    • Remove the 10mm bolt from the ABS sensor
    • Pull the brake line off the strut
    • Pull the ABS sensor off the strut
    • Attach locking pliers to the upper sway bar ball joint
    • Remove the lower sway bar link nut with a 14mm socket and ratchet
    • Remove the sway bar link from the strut
    • Remove the two 19mm nuts and bolts that connect the strut to the wheel spindle
    • Lift the rear seat off its ancho points
    • Push the seat belts through the rear seat cushion
    • Pull the rear seat out through the door
    • Remove the 12mm bolt from each rear seat bolster
    • Pull out the rear seat bolsters
    • Pull the seatbelt aside
    • Pull back the sound-deadening material
    • Remove the three 12mm bolts from the top of the strut
    • Pull the strut down and out
  3. step : Installing the Strut (5:44)
    • Lift the strut into place, lining up the studs
    • Start the 13mm nuts onto the strut mount
    • Insert the 19mm bolts that connect the strut to the wheel spindle
    • Start the 19mm nuts onto the bolts
    • Tighten the 19mm nuts to 83 foot-pounds of torque
    • Put the ABS sensor bracket into place
    • Insert the 10mm bolt into the ABS sensor bracket
    • Put the brake line into place
    • Insert the 12mm bolt into the brake line bracket
    • Put the sway bar link into place
    • Attach locking pliers to the upper sway bar ball joint
    • Fasten the 14mm nut onto the sway bar link
  4. step : Reattaching the Wheel (7:31)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. step : Securing the Strut and Reinstalling the Rear Seat (8:08)
    • Fasten the three 13mm nuts onto the strut mount
    • Push the rear seat bolsters into place using the locating tabs
    • Insert the 12mm bolt into each rear seat bolster bracket
    • Push the rear seat cushion into place
    • Pull the seatbelts through the rear seat cushion
    • Pop in the seat cushion clips

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket
  • 12mm Socket
  • 13mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 14mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 12mm Wrench

5.0 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
0
0
0
0
Camery 99 rear stuarts
I bought from !A.Easy transaction .rep was great and helpful fitted well in my camery 99. working great and solve my problem. very reasonable price. item was shipped on time.
October 4, 2017
Purchased
7 months ago
struts fit really well. all bolts matched up where they were supposed to. very pleased. will trade with 1A again.
February 8, 2017
Purchased
1 year ago
Struts for 2001 Camry
The struts were the right ones. They got here on time with a link to a video that walked me through the process. Excellent!!!
April 14, 2018
Purchased
3 weeks ago
struts
I liked the quick service. The Quality and the price of the struts for the 1999 Toyota Camry were of good quality.
March 23, 2018
Purchased
1 month ago
Great value
I had my struts installed and they perform great! Also they arrived in a timely manner.
February 13, 2018
Purchased
3 months ago
Parts and Service
The parts I ordered were shipped the next morning or day from the day I ordered them. A tracking number was provided. From time of ordering to the day I received the parts was only three day's. impressive because they were shipped 1000 miles. Service great, shipping was included in the price of the parts. Here is the best part of the purchase. I was able to get all the struts for the car for same price I would have had to pay for two struts at O-Riley ($145.00 + tax) in Corpus Christi. Texas. That includes shipping. Amazing savings.
April 11, 2018
Purchased
3 weeks ago
Awesome deal!
The parts ere delivered in a prompt, timely manner and the installation was as instructed in the video. I had already replaced the 2 front struts but it costed me $155 EACH at Advanced Auto Parts and the PAIR was considerably more affordable through your site @ $130 for the 2 struts.
THANKS!!
Johnny Hall
October 6, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
Is alignment required after replacing the rear strut?
Daniel on Jun 8, 2017
BEST ANSWER: No, alignment is required checking the tread of the tires.

Vehicle Fit

  • 1997-2001 Toyota Camry Rear Strut & Spring Assembly L4 2.2L Pair
  • 1999-2003 Toyota Solara Rear Strut & Spring Assembly Pair

This part replaces:

  • Monroe 181681
  • Monroe 181680
  • Monroe 171681
  • Monroe 171680
  • KYB SR4030
  • KYB SR4029
Part #: 1ASSP00004



How-to Video:

(09:40 min)