Replaces

Toyota Camry Solara Strut & Spring Assembly Monroe Quick-Strut 171678 - MNSTS00019

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:37)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (3:27)
    • Hold the sway bar link collar with vise grips
    • Remove the 14mm nut from the top of the sway bar link
    • Remove the vise grips
    • Pull the sway bar out of the strut
    • Remove the ABS sensor wire from the clip
    • Remove the 12mm bolt from the ABS sensor
    • Pull the sensor and brake line aside
    • Loosen the two 22mm nuts at the bottom of the strut
    • Tap the 22mm bolts loose with a hammer
    • Remove the 22mm nuts and bolts
    • Open the hood
    • Remove two of the three 14mm nuts from the top of the strut
    • Loosen the third 14mm nut
    • Support the strut as you remove the last 14mm nut
    • Pull the strut down and out
  3. step : Installing the Strut (7:52)
    • Lift the strut into place
    • Start the three 15mm nuts onto the bolts at the top of the strut
    • Tighten the 15mm nuts to 59 foot-pounds of torque
    • Make sure the steering wheel is straight
    • Line the spindle up with the strut
    • Place the two 22mm bolts into the bottom of the strut
    • Start the two 22mm nuts onto the bolts at the rear
    • Hold the nuts with a 22mm wrench
    • Tighten the bolts with a 22mm socket and ratchet
    • Tighten the 22mm nuts to 156 foot-pounds
    • Clip the brake line and abs wire into place
    • Insert the 12mm bolt into the ABS sensor bracket
    • Push the ABS sensor clip onto the wheel spindle
    • Fasten vice grips to the sway bar link collar
    • Put the sway bar link into the strut
    • Start the 14mm nut onto the sway bar link
    • Tighten the 14mm nut to 29 foot-pounds
    • Remove the vice grips
  4. step : Reattaching the Wheel (10:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 21mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket
  • 14mm Socket
  • 15mm Socket
  • 12mm Socket
  • 21mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
1998 Toyota amry strut replacement
WOW!!! Did I save a BUNCH of money. Parts were a drop in, fit like a glove. 1A Auto video was a step by step instruction one.
I am NOT a mechanic but I Felt like one. Saved close to $1000.00
by doing it my self. My wife said car now rides like a Cadillac
February 24, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2001 Toyota Camry Front Strut & Spring Assembly L4 2.2L Passenger Side Monroe Quick-Strut 171678
  • 1999-2003 Toyota Solara Front Strut & Spring Assembly L4 2.2L Passenger Side Monroe Quick-Strut 171678

This part replaces:

  • Monroe Quick-Strut 171678
Only 1 left in stock
Part #: MNSTS00019


Monroe Quick-Strut
Brand #: 171678

How-to Video:

(12:52 min)