Specifications:

  • Direct replacement
  • Plastic tanks with aluminum core
  • Dimensions:
    • Height: 15 5/8"
    • Width: 28 5/8"
    • Thickness: 5/8"
  • Built to strict quality control specifications

Packaging:

Radiators may incur bent cooling fins or small imperfections during shipping or manufacturing. A few bent fins or small dents and scratches do not affect the fit or the function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these types of insignificant damages.

Transmission Cooler Note:

Some radiators are designed to be used on both automatic and manual transmission applications. These radiator may have fittings for an automatic transmission fluid cooler. However these radiators can be used on manual transmission models without issue and require no additional parts or modifications.

Direct Fit Replacement

Direct fit replacement radiator with core thickness that is equal to the OE radiator.  Other manufacturers make the radiator's core slightly thinner than the OEM to save money.  This decreases the overall performance and lifespan of the part.

Premium Aluminum Core

Engineered for top performance with a premium core that provides efficient cooling and heat-transfer.

100% Leak Tested

100% leak tested and built to strict quality control standards.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the A/C Condenser Fan and Cooling Fan (0:48)
    • Disconnect the A/C Condenser fan wiring harness
    • Pry out the coolant temp sensor harness and its retainer from the fan
    • Remove the two 10mm bolts at the top of the fan
    • Lift the A/C condenser fan up and out
    • Disconnect the cooling fan's wiring harness
    • Remove the two 10mm bolts at the top of the fan
    • Pull the fan up and out
  2. step : Disconnecting the Coolant Temp Sensor (2:02)
    • Disconnect the coolant temp sensor wiring harness at the bottom of the radiator
    • Pry out the retainer holding the connector to the radiator
    • Lay the harness off to the side
  3. step : Draining the Coolant (2:23)
    • Remove the radiator cap
    • Jack up and secure the vehicle on jack stands
    • Remove the six 10mm bolts from the skid plate
    • Have a drain pan ready
    • Unscrew the drain plug
    • Let the coolant drain
    • Tighten the drain plug
    • Bring the drain pan over to the bottom radiator hose
    • Compress the spring clamp and move it back with pliers
    • Twist and work the radiator hose off the radiator
  4. step : Disconnecting the Transmission Cooler Lines (4:32)
    • Make note of the left and right cooler lines
    • Have a drain pan ready
    • Compress the spring clamp and slide it back with pliers
    • Carefully twist the hose off
    • Pinch one end while you remove the hose
    • Quickly hold the hose up while the coolant drains
    • Tuck the hose up behind something to keep it from dripping
    • Place a finger of an old rubber glove over the stud to keep fluid from draining
    • Repeat the process for the other side
  5. step : Removing the Radiator (6:07)
    • Remove the expansion tank hose from the radiator
    • Remove the upper radiator hose from the radiator
    • Remove the two 12mm bolts on the upper radiator support
    • Lift the radiator up and out of the vehicle
  6. step : Preparing the Radiator (8:30)
    • Transfer the rubber bushings from the old radiator over to the new one
    • Transfer the coolant temp sensor over to the new radiator with an 19mm wrench
    • Remove the plug on the new radiator with an 8mm Allen key
    • Inspect the coolant temp sensor O-ring's condition
    • Install the coolant temp sensor into the new radiator with a 19mm wrench
    • Remove the caps and plus
  7. step : Installing the Radiator (9:30)
    • Insert the radiator down into place
    • Reinstall the upper radiator support
    • Tighten the two 12mm bolts on the upper radiator support
    • Reinstall the expansion tank hose
    • Reinstall the upper radiator hose
    • Reinstall the transmission cooler lines
    • Reinstall the lower radiator hose
    • Line up the skid plate
    • Tighten the 10mm bolts to the skid plate
  8. step : Reinstalling the A/C Condenser Fan and the Cooling Fan (11:55)
    • Reconnect the coolant temp sensor wiring harness
    • Insert the A/C condenser fan tino place
    • Press the coolant temp sensor's harness retainer into the A/C condenser fan
    • Reconnect the fan's wiring harness
    • Repeat the process for the cooling fan
    • Tighten the four 10mm bolts to the fans
  9. step : Refilling the Coolant (12:48)
    • Place a funnel in the radiator
    • Fill the radiator with Toyota approved coolant 50/50 mix with water
    • Run the vehicle up to operating temperature and run the heat fan at the lowest speed setting
    • Top off the coolant if necessary
    • Top off the expansion tank if necessary
    • Turn up the fan speed and check for heat
    • Reinstall the radiator cap
    • Drive the vehicle to ensure coolant is cycling properly

Tools needed for replacement:

    Allen Wrenches

  • 8mm Allen Wrench

  • General Tools

  • Jack Stands
  • Drain Pan
  • Funnel
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Freeze

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket

  • Wrenches - Metric

  • 19mm Wrench

4.6 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
1
0
0
Love this place
Ordered a new radiator for my 98 Camry, the shipping was super fast, radiator perfect. Videos make projects much quicker and easier. Life long customer
February 23, 2018
Purchased
3 months ago
Exactly what it said it would be
I have been buying from 1A for just over a year i am a reformed "Zoner" and i am buying all i van from here now. It fit perfectly, installed easily, works great.
October 10, 2017
Purchased
8 months ago
replacement radiator
Radiator arrived promptly without any damage, packaging was sufficient, but box could have been marked "fragile" or "do not drop". Item was an exact copy of original equipment part, fit perfectly. I would recommend this item.
August 31, 2017
Purchased
10 months ago
Put it on myself!
I am a 52 yr old woman and after I watched the video on 1A Auto's you tube channel, I thought, "I can do that myself." And I did. Thank you 1A Auto. Did the repair myself and it only cost me $70!!!
August 3, 2017
Purchased
10 months ago
So far, so good ...
It's only been a couple of weeks since my mechanic installed it, but it seems to be performing as expected. It was less expensive than a similar part that my mechanic could get, and delivery was prompt. I''ll add more to these comments after I gather results from the next several months.
January 30, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2001 Toyota Camry Radiator L4 2.2L
  • 1999-2001 Toyota Solara Radiator L4 2.2L

This part replaces:

  • Hollander 675-59140B
  • Hollander 67559140A
  • Spectra Premium Industries CU1909
  • Partslink TO3010105
  • TYC 1909
Part #: 1ARAD00640


How-to Video:

(14:40 min)