Toyota Camry Solara Intermediate Exhaust Pipe with Gaskets - 1AEMK00180

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Intermediate Exhaust Pipe Resonator (B pipe) is just what you need to get your vehicle running great again!


  • Direct Fit Intermediate Exhaust Pipe with Gaskets
  • Fits between the front pipe & rear muffler section
  • Front connection type: 2 bolt flange
  • Rear connection type: 2 bolt flange
  • Replaces dealer part numbers: 17420-03080, 1742003080
  • Built to strict quality control standards

This direct fit exhaust pipe is a great replacement and is a good value compared to a dealer part!

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Due to the nature and size, exhaust parts may incur minor dents or scratches from handling and load shifting during shipping. These damages do not affect the fit or function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these insignificant damages.

  1. step : Removing the Front Pipe with the Flex Pipe and Cat Converter (1:12)
    • Jack up and support the vehicle on jack stands
    • Loosen the O2 sensor with a 22mm wrench
    • Mark the side of the O2 sensor
    • Count the number of rotations it takes to remove the sensor
    • Slide the rubber hanger off of the stud
    • Support the remaining pipe with a bungee chord
    • Remove the 14mm hardware from the end near the cat convertor
    • Remove the two 14mm nuts from the end near the muffler
  2. step : Installing the Mid-Pipe (4:44)
    • Install the mid-pipe into the hanger
    • Clean the surface before installing the new gasket
    • Tighten the two 14mm bolts to the end near the muffler
    • Tighten the hardware as tight as possible evenly to seal the gasket
    • Counter-turn the O2 sensor by the previous counted amount
    • Thread the O2 sensor into the mid-pipe
    • Tighten the O2 sensor with a 22mm wrench
    • Attach a gasket onto the end pipe
    • Insert the 14mm hardware into place and tighten the cat convertor to the pipe

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 12mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 14mm Wrench

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1999 Toyota Exhaust
The exhaust and the price were great. My only complaint were the studs welded on the muffler. I tried numerous sae. fine and course thread sae nuts, numerous metric size and pitch threads and only one was close but would strip when tightning. (I think that was M10 .25 pitch). I ended up grinding off the studs and using new metric bolts and nuts.
August 30, 2017
Fit perfectly
April 1, 2019
Perfect fit and form.
This was a perfect fit for my 1999 Toyota Solara. A quality part with good value.
November 10, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this part NYS legal?
Maxwell C June 21, 2016
Yes, Its mainly the catalytic converters that you need to be careful with when ordering.
Brian F June 22, 2016
How do I know if this will fit my 1999 Camry? Intermediate pipes on the market seem to vary in size by several inches.
Michael S June 5, 2018
This part fits a 1999 Toyota Camry with L4 2.2L engine size. If your vehicle has a different engine size, this part will not fit.
Elesban A June 5, 2018
If you select the correct engine type it should be correct
T O June 6, 2018
Year Make Model Description
1997-1999Toyota Camry Toyota Camry L4 2.2L Intermediate Exhaust Pipe with Gaskets
2000-2001Toyota Camry Toyota Camry L4 2.2L (Japan Built Models (1st VIN Digit J)) Intermediate Exhaust Pipe with Gaskets
1999-2001Toyota Solara Toyota Solara L4 2.2L Intermediate Exhaust Pipe with Gaskets
Only 7 left in stock
Part 1AEMK00180
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.