Replaces

Toyota Camry Solara Heater Blower Motor with Fan Cage - 1AHCX00085

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This Toyota Camry & Solara blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 87103-06021, 8710306021
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:34)
    • Pull the lower cover from the glove box straight down
    • Disconnect the blower motor electrical connector
    • Remove the three screws that hold the blower motor with a flat blade screwdriver
    • Remove the blower motor
  2. step : Installing the Blower Motor (2:05)
    • Insert the blower motor into place
    • Tighten the three screws to the blower motor
    • Connect the blower motor electric connector
    • Insert the lower cover to the glove box

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T25 Torx Driver

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Easy Replacement. The new blower fit without a problem. Delivery was fast and easy and the price was very reasonable. I will order again from 1A Auto.
July 24, 2017
Quality products
I saw this and knew I had to get it when the local auto parts store was almost double. I watched the video the guys had posted online and it was informative. I was trying to maneuver my way in the same position they were in which would of made it for an easy install. But I ran into issues when trying to get screw off by some wiring harnesses. I ended up having to take the glove box off and then the wiring harness mount off to get to the blower motor a lot easier. All in all, it fixed the problem and was an in expensive part. Thanks!
September 25, 2017
Good product
Electric plug from car didnt fit into blower. Had to cut away a little plastic 1st.
February 8, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2001Toyota Camry Toyota Camry Heater Blower Motor with Fan Cage
1999-2003Toyota Solara Toyota Solara Heater Blower Motor with Fan Cage
Part #: 1AHCX00085


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:52 min)