Toyota Camry Solara Exhaust Pipe with Catalytic Converter Cateran Inc - 1ACCD00267

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • Replaces Front Exhaust Pipe with REAR converter
  • Replaces dealer part numbers: 17410-0H180, 174100H180, 17410-0H150, 174100H150, 410-0H160, 174100H160
  • Details:
    • Inlet:
      • 2 Bolt diamond flange
    • Outlet:
      • 2 Bolt diamond flange
  • High quality 409 grade stainless steel
  • Includes all Pipes and flanges for direct installation (additional clamps may be required)
  • Certified for the following agencies:
    • US Environmental Protection Agency (EPA)
    • Ministry of Environment, Ontario & British Columbia - Canada
  • Built to strict quality control standards

Note:  This converter is not monitored;  the downstream oxygen sensor is located before this converter.


Item Condition: New

5 Year Warranty

This item is backed by our 5-year warranty. In the event this item should fail during intended use, we will replace the part free of charge.

Emissions Note:

Due to state emissions regulations:

We cannot ship this item to California, as it is not California Air Research Board approved.

In the state of New York, this item cannot be installed on California emissions equipped vehicles.

In the state of Maine, this item cannot be sold for or installed on a 2001 model year or newer, California emissions equipped vehicle.

Emissions information can be found on a tag under the hood or from a dealership based on your VIN.

  1. step : Removing the Front Pipe with the Flex Pipe and Cat Converter (1:12)
    • Jack up and support the vehicle on jack stands
    • Remove the three 14mm nuts on the front pipe flange on the bottom of the exhaust manifold
    • Unbolt the two 12mm bolts securing the exhaust before the flex pipe
    • Remove the two 12mm bolts securing the exhaust hanger to the subframe
    • Lower and remove the exhaust
  2. step : Installing the Front Pipe with the Flex Pipe and Cat Converter (4:20)
    • Insert the hanger over the arm
    • Line the front studs of the exhaust manifold into place
    • Reinstall the two 12mm bolts on the hanger
    • Tighten the 12mm bolts with a socket and ratchet
    • Clean the surface before installing the new gasket
    • Insert the 14mm hardware into place and tighten the convertor to the pipe
    • Tighten the hardware as tight as possible evenly to seal the gasket
    • Attach a gasket onto the end pipe
    • Tighten the two 12mm bolts to the brace around the exhaust pipe
    • Tighten the 14mm nuts to the front pipe flange

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 12mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 14mm Wrench

4.83/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
No O2 Sensor plugs
Fit fine. No problems there. But it had 3 holes for O2 sensors and I only needed one of them. Had to purchase plus at $15 each to close them up. But thats not the best part. When I told the NAPA salesman what I had to do, he said they had oil drain plugs the same size for $3 each. I took the other plugs back to Pep Boys for a refund.
January 24, 2017
Perfect fit
This was a perfect fit, from ordering the part,shipping and instillation. Your staff was most helpful and the price was excellent. The thanks for a great experience.
October 23, 2017
Fast transit
I was very happy with the fitment of this exhaust pipe and also surprised that it has a 5 year 50,000 mile warranty.
November 30, 2017
Perfect Fit
Was able to put this on and it fit perfectly on my 2002 Toyota Camry. Was able to pass emission test as well!
February 22, 2018
Toyota Camry Solara Exhaust Pipe with Catalytic Converter
The part came in and was an exact fit. The only issue was an extra port hole for an O2 sensor that needed to be filled in. Went to a local auto parts store and purchased an oil drain plug that fit perfect into the opening. So far so good. No more Check engine light... Yeah!!!
August 9, 2018
For cool 1A
My parts were the less expensive that I could find and they fit perfect up, down stream o2 sensors and exhaust pipe with catalytic converter!! Thanks you have the best price!!
November 4, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
hi, does this include required gaskets ?
Saulius A November 22, 2015
I Do not think it does sorry.
Joe A B November 22, 2015
Hello, Sorry but the gaskets are not included with this item. They are available at your local auto parts store for a small dollar amount.
Brian F November 23, 2015
No, but are easy to get at napa parts store
KEN W November 25, 2015
C U November 4, 2019
This part will fit for 1999 camry ce ?
Tadesse T December 2, 2016
Brian F December 3, 2016
What brand is this product ?
Sean B October 3, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K October 3, 2017
Barbara P October 3, 2017
I’m really not sure. I didn’t look at it before I gave it to my mechanic sorry
DAVID C October 12, 2017
Year Make Model Description
2002-2010Toyota Camry Toyota Camry L4 2.4L Exhaust Pipe with Catalytic Converter
2004-2006Toyota Solara Toyota Solara L4 2.4L Exhaust Pipe with Catalytic Converter
Part 1ACCD00267
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: 33173