Replaces

Toyota Camry Solara CV Axle Shaft TRQ CSA82145 - 1AACV00094

Specifications:

  • Fits LH (Driver Side) Front
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:29)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (3:05)
    • Bend the cotter pin down with needle nose pliers
    • Pull the cotter pin up and out
    • Remove the lock cover on the nut
    • Hold the hub still with a pry bar
    • Break the axle nut socket loose with a 32mm socket and breaker bar
    • Leave the nut at the end of the axle
    • Hammer the axle out
    • Remove the axle nut
  3. step : Removing the CV Axle from the Spindle (4:24)
    • Remove the 12mm bolt retaining the ABS wire
    • Remove the line out of the way
    • Break the 22mm strut nuts loose and remove them
    • Tap the bolts out of the spindle with a punch and hammer
    • Pull the spindle down and out of the strut
    • Pull the axle out of the spindle
  4. step : Removing the CV Axle from the Differential (6:07)
    • Have a drain pan ready
    • Insert two pry bars to 3 and 9 o'clock on the axle
    • Carefully work the snap ring out of its holder inside the differential
    • Remove the axle from the differential
  5. step : Installing the CV Axle to the Differential (8:30)
    • Lubricate the inboard joint on the axle with transmission fluid
    • Align the axle splines with the splines in the differential
    • Work the axle into the differential
  6. step : Inserting the CV Axle to the Spindle (9:06)
    • Line up the splines into the hub
    • Start the axle nut on the end of the axle
    • Reinstall the 22mm strut bolts to the spindle
    • Tap the bolts into place with a hammer if needed
    • Tighten the nuts to 156 foot-pounds
    • Snap the ABS retainer into place
    • Tighten the 12mm bolt to the ABS wire
  7. step : Installing the Axle Nut (10:52)
    • Tighten down the axle nut with a 32mm socket and ratchet
  8. step : Reinstalling the Wheel (10:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to partial weight the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Lower the jack
    • Torque the axle to 217 foot-pounds
    • Reinstall the lock cap and new cotter pint to the axle nut
    • Reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Drain Pan
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 32mm Socket
  • 22mm Socket
  • 12mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-2001 Toyota Camry L4 2.2L CV Axle Shaft Driver Side TRQ CSA82145
  • 1999-2001 Toyota Solara L4 2.2L CV Axle Shaft Driver Side TRQ CSA82145

This part replaces:

  • OE # 4342006160
  • Hollander 447-60096L
  • TRQ CSA82145
  • A1 Cardone 66-5038
Part #: 1AACV00094


TRQ
Brand #: CSA82145

How-to Video:

(12:24 min)