Toyota Camry Solara CV Axle Shaft Pair TRQ CSA82451 - 1AACS00078

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side) FRONT
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:29)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (3:05)
    • Bend the cotter pin down with needle nose pliers
    • Pull the cotter pin up and out
    • Remove the lock cover on the nut
    • Hold the hub still with a pry bar
    • Break the axle nut socket loose with a 32mm socket and breaker bar
    • Leave the nut at the end of the axle
    • Hammer the axle out
    • Remove the axle nut
  3. step : Removing the CV Axle from the Spindle (4:24)
    • Remove the 12mm bolt retaining the ABS wire
    • Remove the line out of the way
    • Break the 22mm strut nuts loose and remove them
    • Tap the bolts out of the spindle with a punch and hammer
    • Pull the spindle down and out of the strut
    • Pull the axle out of the spindle
  4. step : Removing the CV Axle from the Differential (6:07)
    • Have a drain pan ready
    • Insert two pry bars to 3 and 9 o'clock on the axle
    • Carefully work the snap ring out of its holder inside the differential
    • Remove the axle from the differential
  5. step : Installing the CV Axle to the Differential (8:30)
    • Lubricate the inboard joint on the axle with transmission fluid
    • Align the axle splines with the splines in the differential
    • Work the axle into the differential
  6. step : Inserting the CV Axle to the Spindle (9:06)
    • Line up the splines into the hub
    • Start the axle nut on the end of the axle
    • Reinstall the 22mm strut bolts to the spindle
    • Tap the bolts into place with a hammer if needed
    • Tighten the nuts to 156 foot-pounds
    • Snap the ABS retainer into place
    • Tighten the 12mm bolt to the ABS wire
  7. step : Installing the Axle Nut (10:52)
    • Tighten down the axle nut with a 32mm socket and ratchet
  8. step : Reinstalling the Wheel (10:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to partial weight the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Lower the jack
    • Torque the axle to 217 foot-pounds
    • Reinstall the lock cap and new cotter pint to the axle nut
    • Reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Drain Pan
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 32mm Socket
  • 22mm Socket
  • 12mm Socket
  • 21mm Socket

4.91/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Cv axles 95 Camry 2.2
Parts fit well, however, the input shaft dust shields were bent in shipping and they did not come with new cotter pins
March 4, 2017
best bang for your buck
product was straight forward to install, it works well, and has lifetime warranty. But.. the only problem I had was that axle nuts provided where different sizes.
August 4, 2017
Good cvs
After a month so far so good went right on my 95 Camry
October 25, 2017
The absolute best
A friend of mines recommend this site to me and at first Im like no way those parts are that cheap, but the kicker is they are actually brand new products for a very affordable price which is amazing. Shipping came very very fast and all my pieces were there. I would certainly give this place an A-1 rating and most certainly will be ordering again!
April 8, 2018
Best Bang for your buck
1A Auto has been my #1 choice for auto parts for my wifes 2000 Toyota Camry. Replacing these CV axels were a breeze thanks to the helpful videos and guides. These were a direct fit and the car now has no more clicking noises when turning. Great product for a great price.
April 30, 2018
Great Price, Better Service
After reading several very positive reviews about 1A Auto, I decided to order both CV axles for my Toyota Camry from them. I was very pleased with their price, which included free ground shipping. I received my product two-days ahead of when they were scheduled to arrive. Its not easy to find a company these days who goes out of their way to take care of their customers. I would highly recommend 1A Auto to anyone who is looking for any of the large selection of products they carry.
June 14, 2018
Fast shipping. Excellent quality parts. Fit my 1994 Camry perfectly. Very happy with the service and quality of 1aauto.
September 11, 2018
Best axles for the price
These axles are top quality, low priced, and are delivered super fast. Perfect fit for my 1996 Toyota Camry station wagon. The removal and replacement video helped out a ton too. Definitely recommend these parts to anyone looking to fix up their rides.
October 23, 2018
Love this place
Found parts online. I called to make a purchase the wait time was short. The customer service was great very friendly and polite, helped me find exactly what I needed and helped me get the best price. Will order from them again!
January 2, 2019
Cv axle in many more parts
Your product are very good in realiable I love be your costumer you GUYS are very good I not a mechanic but your videos are very helpful thack you for old your help
January 6, 2019
Perfect fit!
The part was an exact match to the original. Was easy to install and have had no issues since.
June 21, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Brand name of part Im ordering?
Levi M April 23, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please dont hesitate to ask.
Brian F April 25, 2016
Year Make Model Description
1992-2001Toyota Camry Toyota Camry Pair L4 2.2L CV Axle Shaft TRQ CSA82451
1999-2001Toyota Solara Toyota Solara Pair L4 2.2L CV Axle Shaft TRQ CSA82451
Part 1AACS00078
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82451