This air cleaner fresh air intake hose is just what you need to get your vehicle in good working order again! It fits between the air cleaner box assembly and the throttle body. Over time heat and the elements can crack the hose that will form emission leaks and may hurt engine performance. Replace that old, leaking intake hose with this high quality replacement!

Specifications:

  • Direct fit replacement
  • Includes all necessary PVC and emission port provisions
  • Replaces dealer part numbers: 17881 74730, 1788174730, 12260 74070, 1226074070
  • Built to strict quality control standards

This engine air intake hose makes a great replacement with substantial savings over a part from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Air Intake Hose (0:35)
    • Loosen the hose clamp near the air box with a 10mm socket and ratchet
    • Loosen the hose clamp below the middle with a 10mm socket and ratchet
    • Loosen the hose clamp near the throttle body with a 10mm socket and ratchet
    • Loosen the vacuum hose clamp with a pair of pliers
    • Remove the intake boot from the pin underneath the hose
  2. step : Installing the Air Intake Hose (3:12)
    • Transfer the old clamps to the new hose
    • Connect the intake boot to the pin underneath the hose
    • Tighten the vacuum hose clamp with a pair of pliers
    • Tighten the hose clamp near the throttle body with a 10mm socket and ratchet
    • Tighten the hose clamp below the middle with a 10mm socket and ratchet
    • Tighten the hose clamp near the air box with a 10mm socket and ratchet

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
6
0
0
0
0
Easy cheap replacement
Bought this as a replacement for my son's 1999 Toyota Camry. Bought a used car and this part was taped shut with duct tape that was already failing. Found this part on 1A Auto for cheap and with fast shipping had it replaced in 15 minutes!
October 2, 2017
Purchased
11 months ago
Was perfect fit
I decided to buy the part from 1A Auto because they had a video on how to replace the actual part. Since it showed the part fit perfectly on the video, that convinced me to go ahead and buy it. It arrived quickly and i installed it the same day and my Camry was working again.
August 3, 2017
Purchased
10 months ago
Super easy install with no prior knowledge.
I know nothing about cars. But I knew this part needed replacing on my car, so I googled it. I found a 10 minute YouTube video showing how to replace it and a link to the part here on 1AAuto. I had previously priced out the part at AutoZone. They wanted 187 dollars. 1A wanted 31. So I bought it, thinking even if I failed it was a low risk venture since it was so cheap. The part arrived super fast (with free shipping) and I installed it in 15 minutes with the help of the video. I will forever buy parts from 1A from now on.
October 30, 2017
Purchased
7 months ago
Extremely satisfied!!!
Thank you 1A Auto! Not only did you have the parts I need at very reasonable and affordable prices, you had the videos that explained exactly how to replace each part. From start to finish, I was able to replace both parts within a half hour! And I have no mechanical experience and thanks to you, I feel more comfortable and confident in trying more repairs on my own, with your help and instruction. Oh, and the most exciting was that...I save a whole lot of cash!!! Thanks!!!
July 22, 2017
Purchased
10 months ago
The video was easily understood and the parts wasn't hard to install.
November 28, 2017
Purchased
6 months ago
Feels Good
After looking to clean my sticking throttle plate on my old 1999 Camry, I noticed that the intake hose had completely separated from the throttle box. I ordered this part. It was very easy to install with the help of the 1A video. One slight problem.The hole on the bottom tab was missing. I felt that a hole was required to be there to help secure the tray beneath the hose. I drilled a hole in the tab. The hose then fit perfectly. Saved myself some money
to boot. Thanks 1A.
March 10, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Toyota Camry Air Intake Hose L4 2.2L
  • 1999 Toyota Solara Air Intake Hose L4 2.2L

This part replaces:

  • OE # 1788174730
  • OE # 1226074070
  • Dorman 696-706
Part #: 1AEIH00024

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:27 min)