Replaces

Toyota Camry Solara A/C Condenser Cooling Fan Assembly - 1AACF00031

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market!

This condenser cooling fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications

  • New, not rebuilt, electric motor(s)
  • Geometrically designed plastic blade(s) for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Built to strict quality control standards
  • Direct bolt on

We have noticed that there are many inferior quality fan motors on the market. We have researched other fan motor manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket fan motors available. So don't be fooled by cheaper made imitation cooling fan assemblies. Go with superior quality!

Now you can buy a high quality AC Condenser cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the A/C Condenser Fan (0:45)
    • Disconnect the electrical connector
    • Pry off the coolant temp sensor harness from the fan and unclip it
    • Remove the two 10mm bolts
    • Pull the fan out of the tabs
    • Lift the fan up and out
  2. step : Preparing the A/C Condenser Fan (2:56)
    • Clamp the backside of the connector on the fan
    • Pull the connector out
    • Wedge a small flat blade to pry the retainer off
    • Insert the retainer to the new connector
    • Press the connector into the new A/C condenser fan
  3. step : Installing the A/C Condenser Fan (3:44)
    • Insert the A/C fan into place
    • Tighten the two 10mm bolts
    • Press on the coolant temp sensor harness
    • Connect the electrical connector

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Toyota Camry A/C Condenser Cooling Fan Assembly L4 2.2L Driver Side
  • 1999 Toyota Solara A/C Condenser Cooling Fan Assembly L4 2.2L Driver Side

This part replaces:

  • OE # 1636374260, 1636174060, 1671174060
  • Partslink TO3115102
  • Hollander 674-58818A
  • Dorman 620-518
  • TYC 600100
  • DEPO 312-55005-102
Only 2 left in stock
Part #: 1AACF00031



How-to Video:

(04:46 min)