The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

Specifications:

  • Comes as a PAIR
    • LH (Driver Side) and RH (Passenger Side)
  • New not remanufactured
  • Replaces dealer part numbers: 90919-02218, 90080-19008, 90919-02218, 90080-19007, 90919-02217, 9008019008, 9008019007, 9091902217, E505D, E-505D
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits the following Toyota 4 cylinder engines as listed:
    • L4 2.0L (5SFE)
    • L4 2.2L (5SFE, 5SNFE)

Note: For vehicles requiring Engine ID (Identification): The Engine ID is usually located on a paper tag located on the valve cover.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coil (0:58)
    • Disconnect the ignition coil wires
    • Disconnect the wiring harness
    • Remove the two 10mm bolts from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (4:03)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 10mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Connect the ignition coil wires

Tools needed for replacement:

    Wrenches - Metric

  • 10mm Wrench

3.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
1
Put out that Check Engine Light
The ignition coil fit perfectly. It was pretty easy to install with just
a 10 mm wrench. It took maybe 15 minutes.
July 31, 2017
Purchased
7 months ago
Ignition coil for the 99 camry
Really dine the trick, just what the old girl needed and at a great price. Thank you
June 17, 2017
Purchased
11 months ago
Plug Fitment
I purchased both coils for my vehicle. As far as mounting and plug wire connections everything fit well. The electrical plug on the other hand, didn't fit on one coil. I had to use the better of the two older coils. Now I'm left with 1 extra coil. The vehicle runs alright though. If I ever have a misfire, Ill know where it's coming from.
June 25, 2017
Purchased
10 months ago
Response from 1A Auto
Hello, Isaac! I am sorry to hear that one of the ignition coils you purchased from us had a improperly molded connector. If you wish to get a replacement part please contact our service department! 888-844-3393
June 26, 2017
Tim KStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:19 min)

Tools List:

    Wrenches - Metric

  • 10mm Wrench




Vehicle Fit

  • 1997-2001 Toyota Camry Ignition Coil L4 2.2L Pair
  • 2000-2001 Toyota Camry Ignition Coil L4 2.2L CNG Pair
  • 1998-2000 Toyota Rav4 Ignition Coil L4 2.0L Pair
  • 1999-2001 Toyota Solara Ignition Coil L4 2.2L Pair
Part #: 1AERK00239

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More