The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

This Ignition Coil features the following specifications:

  • LH (driver Side)
  • New not remanufactured
  • Replaces dealer part numbers: 9008019008, 90919-02218, 90080-19008, 90919-02218
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Considered coil #2 ID Marked #90080-19008 or 90919-02218

Note: For vehicles requiring Engine ID (Identification): The Engine ID is usually located on a paper tag located on the valve cover.

 

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:58)
    • Disconnect the ignition coil wires
    • Disconnect the wiring harness
    • Remove the two 10mm bolts from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (4:03)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 10mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Connect the ignition coil wires

Tools needed for replacement:

    Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2001Toyota Camry Toyota Camry Ignition Coil Driver Side L4 2.2L (Engine ID 5SFE) Coil ID 90919-02218
1997-2001Toyota Camry Toyota Camry Ignition Coil Driver Side L4 2.2L (Engine ID 5SFE) Coil ID 90080-19008
2000-2001Toyota Camry Toyota Camry Ignition Coil Driver Side L4 2.2L (Engine ID 5SFE) Coil ID 90919-02218
2000-2001Toyota Camry Toyota Camry Ignition Coil Driver Side L4 2.2L (Engine ID 5SFE) Coil ID 90080-19008
1998-2000Toyota Rav4 Toyota Rav4 Ignition Coil Driver Side L4 2.0L Engine ID 3SFE Coil ID 90919-02218
1999-2001Toyota Solara Toyota Solara Ignition Coil Driver Side L4 2.2L (Engine ID 5SFE) Coil ID 90919-02218

This part replaces:

  • OE # 9008019008
  • OE # 9091902218
  • Hollander 610-58482
  • Standard Motor Products UF-181
Part #: 1AECI00147


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:19 min)