Toyota Camry Exhaust Pipe with Catalytic Converter - 1ACCD00148


  • Replaces Front Exhaust Pipe with REAR converter
  • Details:
    • Inlet:
      • 3 Bolt triangular flange
    • Outlet:
      • 2 Bolt oval flange
    • NO Oxygen sensor provisions
  • High quality 409 grade stainless steel
  • Includes all Pipes and flanges for direct installation (additional clamps may be required)
  • Certified for the following agencies:
    • US Environmental Protection Agency (EPA)
    • Ministry of Environment, Ontario & British Columbia - Canada
  • Built to strict quality control standards

5 Year Warranty

This item is backed by a 5 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. 

Emissions Note:

Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B ( California Air Research Board) approved for use in this state.

Due to New York state emissions regulations, this item cannot be installed on a California emissions equipped vehicle in the state of New York.

All emissions information for a vehicle can be found on a tag under the hood. If the tag is missing, you can contact a dealership with your VIN to determine which emissions system your vehicle is equipped with.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does it include a port for the heat oxygen sensor?
Charles L on Mar 2, 2018
BEST ANSWER: No it does not

Vehicle Fit

  • 1992-1993 Toyota Camry Front Exhaust Pipe with Catalytic Converter L4 2.2L with California Emissions
  • 1994-1996 Toyota Camry Front Exhaust Pipe with Catalytic Converter L4 2.2L with Federal Emissions

This part replaces:

  • OE # 174107A180
  • OE # 174107A170
Part #: 1ACCD00148

Out of Stock