Replaces

Toyota Camry Corolla Solara Fog / Driving Light - 1ALFL00158

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement fog driving light is just what you need to get your Toyota Camry or Solara in good looking form again!

Specifications:

  • Fits LH (Driver Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This Camry or Solara fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the front bumper cover (0:50)
    • Remove the ten screws and three push clips securing the bumper cover.
    • Starting from the sides pull out and unclip the bumper cover.
    • Unplug the wiring harness from the fog lights.
  2. step : Remove the fog light (2:12)
    • Remove the ground effect by removing the three tabs around the fog light.
    • Push out the silver tabs with your flat blade screwdriver
    • Set the ground effect aside.
    • Unclip the fog light.
  3. step : Install the new fog light (3:38)
    • Clip the fog light in place.
    • Replace the ground effect, clipping it in.
    • Anchor with the three blue clips.
  4. step : Put the bumper cover back on (4:41)
    • Plug in the wiring harness to the fog lights
    • Clip the bumper cover on, starting at the edges.
    • Secure with the ten Phillips screws and three push clips.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Toyota Camry Toyota Camry Fog / Driving Light Driver Side
2004Toyota Corolla Toyota Corolla (Built After 4/04 Production Date) Fog / Driving Light Driver Side
2005-2008Toyota Corolla Toyota Corolla Fog / Driving Light Driver Side
2002-2003Toyota Solara Toyota Solara Fog / Driving Light Driver Side
Part #: 1ALFL00158


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:42 min)