Replaces

Toyota Brake Rotor Pair Nakamoto 31327-DSZ - 1APBR00109

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
  • Vented
  • 12.6" (319mm) Diameter
  • For models with 13WG or 13WL caliper casting number

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:57 min)

Tools List:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket



This part replaces:

  • Nakamoto 31327-DSZ

Vehicle Fit

  • 2003-2009 Toyota 4Runner SR5 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2009 Toyota 4Runner Limited Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 12.6" (320mm) Diameter Rotors Performance Nakamoto
  • 2007-2014 Toyota FJ Cruiser Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2014 Toyota Tacoma 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2014 Toyota Tacoma 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair PreRunner for Models with 6 Lug Wheels Performance Nakamoto
Part #: 1APBR00109

Out of Stock

Nakamoto
Brand #: 31327-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More