Replaces

Toyota Brake Caliper Raybestos Opti-Cal FRC11550N - RABCR00043

Raybestos Opti-Cal New Brake Caliper

  • Designed to match OE specifications
  • Made with 100 percent newly manufactured materials, offering unparalleled style and performance
  • Zinc plated or aluminum, delivering superior corrosion resistance in the harshest of elements
  • Rigorously tested to ensure a safe, reliable performance after thousands of miles
  • Friction-ready, giving you the freedom to customize the brake pads for each application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2009Toyota 4Runner Toyota 4Runner Front Brake Caliper Driver Side for Models with 12.5" (317mm) Diameter Front Rotors & with Caliper Casting #13WL Raybestos Opti-Cal FRC11550N
2007-2014Toyota FJ Cruiser Toyota FJ Cruiser Front Brake Caliper Driver Side for Models with with Caliper Casting #13WL Raybestos Opti-Cal FRC11550N
2003-2006Toyota Sequoia Toyota Sequoia with Caliper Casting #13WL Brake Caliper Front Driver Side 5.3 Inch Front Pad Length for Models with & Raybestos Opti-Cal FRC11550N
2007Toyota Sequoia Toyota Sequoia Front Brake Caliper Driver Side for Models with with Caliper Casting #13WL Raybestos Opti-Cal FRC11550N
2000-2006Toyota Tundra Toyota Tundra Front Brake Caliper Driver Side for Models with with Caliper Casting #13WL & 5.3 Inch Front Pad Length Raybestos Opti-Cal FRC11550N

This part replaces:

  • Reference Number 19-2712
  • Raybestos Opti-Cal FRC11550N
Only 2 left in stock
Part #: RABCR00043


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Raybestos Opti-Cal
Brand #: FRC11550N

How-to Video:

(11:57 min)