Part Details

  • Design: Adjustable

Specifications:

  • Fits either LH (Driver Side) or RH (Passengers Side) REAR
  • Bolts to rear knuckle
  • Adjustable
  • Track bar is new, not remanufactured or refurbished
  • Includes new end bushings already installed
  • Commonly also called:
    • Rear knuckle rod

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:13)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Lateral Link (1:35)
    • Loosen the 19mm nut near the spindle with a socket and ratchet
    • Loosen the 19mm nut near the subfram with a 19mm socket and ratchet and wrench
    • Remove the plate
    • Tap the link off if needed
    • Remove the lateral link
  3. step : Installing the Rear Lateral Link (3:39)
    • Measure and adjust the new rear lateral link so that it matches the old link
    • Press the lateral link into place
    • Replace the plate
    • Tighten the 19mm nuts to the lateral link
    • Torque the nuts to 134 foot-pounds
    • Lock the adjusting lock nuts with a 24mm wrench
  4. step : Reattaching the Wheel (5:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 24mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2004Toyota Avalon Toyota Avalon Rear Rearward Adjustable Lateral Link Driver or Passenger Side
1997-2001Toyota Camry Toyota Camry (US Built Models) Rear Rearward Adjustable Lateral Link Driver or Passenger Side
1999-2003Toyota Solara Toyota Solara Rear Rearward Adjustable Lateral Link Driver or Passenger Side

This part replaces:

  • Dorman 905-806
  • Moog K641851
  • OE # 48730-AA020
  • OE # 48740-AA020
  • OE # 48740AA020
  • OE # 48730AA020
Part #: 1ASSL00099


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:10 min)