Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
All right. One of the first things we need to do is safely raise and support the vehicle so the wheel's off the ground. We're gonna remove the lug nuts and take the tire off. Let's go ahead and get the proportion of the sway bar link off of the strut. Use your wrench, and then you're gonna need to use a tool to hold the center. There we are. Now, let's do the same to the lower. Let's get ready to install our brand new sway bar link.
Something I want you to look at is right here on the stud. You have an area that you can grab onto with a wrench. Start that nut on there. Let's get our sway bar link in here. Let's torque this to 55 foot-pounds. Do the same to the other one. Let's get the wheel back on here. We'll snug up all the lug nuts, and then, we'll torque them to 76 foot-pounds. With the wheel so it's just barely touching the ground, let's go ahead and torque these. Torqued.
Tools used
Tools used
Let's safely raise and support the vehicle, and then we're gonna remove our wheel. Now that we have the wheel off, let's go ahead and remove our sway bar link. Now, let's put in our brand new sway bar link here. Let's get the sway bar link in here. Okay. That's bottomed out. Now, we're going to go ahead and torque this to 55 foot-pounds. Now, let's get the wheel on. With the wheel just barely touching the ground so it can't spin, let's go ahead and torque these lugnuts, 76-foot-pounds. Torqued.
Tools used
Tools used
Tools used
