Replaces

Toyota 4Runner FJ Cruiser Tacoma Front Strut & Spring Assembly Pair TRQ SCA57023 - 1ASSP00409

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:22)
    • Raise the vehicle with minimal weight on the wheel
    • Loosen the six 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the six lug nuts
    • Remove the wheel
  2. step : Removing the Front Strut (0:46)
    • Remove the 10 mm ABS wire bracket bolt to remove the bracket
    • Remove the upper ball joint castle nut pin
    • Remove the 19 mm upper ball joint castle nut
    • Hammer the knuckle around the ball joint to loosen it from the knuckle
    • Tie off the knuckle so that the axle does not fall out
    • Remove the 12 mm ABS wire bracket bolt from the knuckle to remove the bracket
    • Remove the 19 mm nut from the 19 mm lower strut bolt
    • Remove the lower strut bolt
    • Remove the three 14 mm top strut mount nuts
    • Remove the 17 mm sway bar link nut to remove the sway bar link from the knuckle
    • Remove the sway bar link from the knuckle on the opposite side of the vehicle to freely move the sway bar for clearance
    • Remove the strut
  3. step : Installing the Strut (10:07)
    • Insert the strut top mounting studs into the body, and slide the bottom mount into the bracket
    • Install the three 14 mm strut top mounting nuts
    • Install the 19 mm lower strut bolt
    • Install the washer and 19 mm nut onto the lower strut bolt
    • Torque the 14 mm top mount nuts to 47 ft-lb
    • Torque the 19 mm lower strut nut to 100 ft-lb
    • Install the upper ball joint into the knuckle
    • Install the 19 mm upper ball joint castle nut
    • Torque the upper ball joint castle nut to 81 ft-lb, then tighten further to align the pin hole, if necessary
    • Install the upper ball joint pin
    • Reinstall the ABS wire bracket to the upper control arm with the 10 mm nut
    • Reinstall the sway bar links into the knuckles
    • Reinstall the ABS wire bracket onto the knuckle with the 12 mm bolt
  4. step : Installing the Wheel (17:16)
    • Install the wheel onto the wheel studs
    • Install the six lug nuts and tighten them by hand in a crossing pattern
    • Lower the vehicle with minimal weight on the wheel
    • Torque the 21 mm lug nuts to 85 ft-lb in a crossing pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Locking Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pocket Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 17mm Socket
  • 19mm Socket
  • 21mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Strut/shock delivery
I ordered a pair of loaded struts for a 2007 Toyota Tacoma. This was not the easiest part to find and the price from the dealer was outrageous! AND I would have had to buy 4 separate pieces, doubling my labor! I have been thrilled with A1 thus far and as long as they fit, will be using them quite a lot in the future!! SJR Owner Cromwell Valley Motors
January 2, 2018
Just what I expected
I needed this strut/spring assembly quick and i paid a great price for it. It got here in 3 or 4 days and I installed them myself which went well. Only complaint is they are sagging a bit already after only having them on 2 weeks. Kinda what I expected for the price though. Also, the description says they replace Monroe quick struts, but they aren’t monroe parts. It’s all the 1A auto brand parts. I dont even know why they say it replaces a monroe part when the truck came stock on bilstein 4600’s, but in the end they work and that’s all i was really needing.
July 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Whom is the manufacturer of this product?
Christopher W January 5, 2016
Hello, These are a 1A Auto house branded part/kit.
Brian F January 6, 2016
The ones i received were FCS Auto branded
Thomas H April 23, 2017
Will they fit on a 2008 Toyota tocoma 2.7 liter access cab 2 wheel drive?
Kerry S July 19, 2018
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
Jessica D July 19, 2018
They fit my 2007 Tacoma PreRunner perfectly.
H H July 19, 2018
Year Make Model Description
2003-2009Toyota 4Runner Toyota 4Runner (without X-REAS Suspension System) Front Strut & Spring Assembly Pair
2010-2018Toyota 4Runner Toyota 4Runner without Kinetic Dynamic Suspension (KDSS) Front Strut & Spring Assembly Pair
2007-2014Toyota FJ Cruiser Toyota FJ Cruiser Front Strut & Spring Assembly Pair
2005-2015Toyota Tacoma Toyota Tacoma Pre Runner Rear Wheel Drive Front Strut & Spring Assembly Pair
2005-2015Toyota Tacoma Toyota Tacoma 4 Wheel Drive Front Strut & Spring Assembly Pair
Part 1ASSP00409
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57023