Replaces

Toyota 4Runner FJ Cruiser Brake Kit Nakamoto CD976, CD606, 31294-DSZ, 31327-DSZ - 1APBS00435

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      6 Lug
      12.56" (319mm)
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications:
      12.28" (312mm)
      Vented
      6 Lug
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
  • Front 12.6" (319mm) diameter
  • Rear 12.29" (312mm) diameter
  • For models with 13WG or 13WL caliper casting number

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Not installed yet
I havent installed yet as we have 2ft of snow but everything looks fine. Will let you know after I use them.
January 23, 2017
Brakes at ease
I ordered a full set of rotors and brake pads. They arrived ahead of schedule. Every thing fit perfect. Brakes work great andno wobble or shake when you stop.
August 6, 2018
Great product! Better than oem
I bought this kit for my 2003 4runner SR5 and it looks and works better than my original previous one, which were the oem one! The braking is quiet and no dust on my wheels ! I got the kit really fast and quality is great, the fit was perfect ! And it looks like a different car now ! At least the brakes !!!! Great product, great price and great quality! Will buy again !
December 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What size rim are these made for?
Conner F September 20, 2018
These parts are not specific to the rim size. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Jessica D September 20, 2018
Year Make Model Description
2003-2009Toyota 4Runner Toyota 4Runner Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2007-2009Toyota FJ Cruiser Toyota FJ Cruiser Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
Part #: 1APBS00435


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD976, CD606, 31294-DSZ, 31327-DSZ

How-to Video:

(11:57 min)