Replaces

Timing Chain Set with Oil Pump and Water Pump - 1ATBK00175

Specifications:

  • Includes:
    • (2) Timing Chains - 122 Link
    • (1) Left Tensioner - Plastic body style
    • (1) Right Tensioner - Plastic body style
    • (1) Left Tensioner Guide Rail
    • (1) Right Tensioner Guide Rail
    • (1) Left Fixed Guide Rail
    • (1) Right Fixed Guide Rail
    • (1) Crank Sprocket - Double row
    • (2) Cam Sprockets
    • (1) Water Pump
    • (1) Oil Pump

Please note: This timing set is designed for the professional installer.  The factory installation procedures must be followed unless otherwise noted. 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Drain the Radiator (2:21)
    • Put a catch pan under the radiator
    • Use a wrench to open the valve and drain the radiator
    • Replace the cap
    • Put the catch pan under the middle front of the engine
  2. step : Remove the Serpentine Belt (2:57)
    • Insert the ratchet into the tensioner
    • Push clockwise on the tensioner and remove the belt from the alternator
    • Slowly release back on the tensioner
    • Remove the belt from the water pump pulley and set it aside
  3. step : Remove the Cooling Fan (4:18)
    • Place a belt wrench on the cooling fan pulley
    • Use an adjustable wrench on the large bolt holding the fan
    • Remove the fan
  4. step : Removing the Water Pump (5:29)
    • Place the belt wrench on the water pump pulley
    • Remove the four 10mm bolts securing the pulley
    • Use a flat blade screwdriver to pry from the back of the water pump pulley. Turn it and continue to pry till it comes off
    • Remove the four 10mm bolts securing the water pump
    • Use a hammer to hit the side of the water pump shaft. When it starts to separate use a flat blade screwdriver to help get the pump free
    • Use a sponge and wire brush to clean up the area
  5. step : Installing the New Water Pump (8:12)
    • Put penetrating oil on the water pump
    • Line it up and push it into place
    • Replace the four 10mm bolts. Hand tighten each of them and work your way around. Tighten incrementally. Then tighten them to 19ft/lbs
    • Replace the pulley and replace the four 10mm bolts. Tighten to 20ft/lbs
    • Turn the cooling fan back in to place and replace the bolt
    • Replace the belt around the crankshaft
    • Loosen the tensioner
    • Put the belt over the alternator
    • Tighten the tensioner
    • Make sure the belt is properly in place
  6. step : Refilling the Antifreeze (12:04)
    • Fill the truck back up with antifreeze
    • Start the vehicle to circulate the antifreeze
    • Fill the antifreeze back to the line
    • Drive the vehicle
    • Let it cool then fill to the line again

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Sponge

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Belt Wrench

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Great parts for the money
My truck runs awesome now. I gave it a four star just because the guides that came with the kit were not that great to work with. But on the other hand all the rest was quality parts. I did not use the oil pump that came with the kit I went with a melling oil pump.
June 3, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Are these parts made in the USA?
A C on Mar 26, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. These parts are made overseas. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
1997-2009Ford Expedition Ford Expedition Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5)
2005-2006Ford F150 Truck Ford F150 Truck Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5) or (8th Vin Digit V)
2005-2008Ford F250 Super Duty Truck Ford F250 Super Duty Truck Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5)
2005-2008Ford F350 Super Duty Truck Ford F350 Super Duty Truck Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5)
2006Lincoln Mark LT Lincoln Mark LT Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5)
2005-2013Lincoln Navigator Lincoln Navigator Timing Chain Set with Oil Pump and Water Pump V8 5.4L (8th Vin Digit 5)

This part replaces:

  • A1 Cardone PWP9097
  • Airtex AW4122
  • Reference Number 55-23324
  • Reference Number M340
  • Dorman 917-250
  • Hollander 324-00890
  • OE # 9L3Z6600A
  • OE # 3L3Z6600AA
  • OE # 3L3Z8501CA
  • OE # 3R2Z6A257DA
Only 1 left in stock
Part #: 1ATBK00175


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:09 min)