Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Brand New Tie Rod Ends
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Outer
  • Direct replacement
  • Built to strict quality control standards

 

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:38)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:49)
    • Loosen the 24mm nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 22mm nut from the outer tie rod end
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:49)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the 22mm castle nut onto the outer tie rod
    • Torque the nut to 45 foot-pounds, then torque to an additional 90 degrees
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Tighten the 24mm nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (5:08)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 135 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket

  • Wrenches - Metric

  • 24mm Wrench

4.67/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
1
0
0
Just right
Parts came in on time and aspect out as expected.Awesome site, feel confident in ordering from 1A auto. Be sure you know your vehicle before ordering.
August 17, 2017
Tie rod kit both inner and outer for 2008 Ram 1500 quad cab
Very happy with the ordering process, not sure I liked the courier set up, Fed -ex turned it over to USPS which caused the parts to be delayed an additional day. Packaging was ok however the little space bags basically let all of the steel parts handle all the abuse of shipping. The parts were an exact replacement and fit for my truck. Easily installed exactly as the 1aauto video depicted. I have been generally handy with my vehicles through the years and this is the first tie rods I had replaced and with a process like this I will use them again
October 27, 2017
Good quality good price
Good quality seems to be well built, the DIY videos were good.Quick ship. Will order again!
February 12, 2018
Excellent Fit, Prompt Delivery
Part arrived quickly and in good order. My only complaint is that the outer tie-rod is non grease-able which will limit the parts usable life span. Not a big deal but would have liked to have that pointed out in the product description, so 3 stars. But all in all a good product for a good price.
March 13, 2018
So far so good !!!
First off easy to order had just what I needed at a great price. Second my order got to me exactly when they said it would which way fast by the way and third when I opened the box and inspected the product I was impressed with th quality and everything I needed was in there. I put them on my truck with no problem with help of their videos. I would definitely recommend this product to anyone !!!
September 26, 2018
High Quality Parts
The tie rods fit perfectly and are working wonderfully. I’ve never had anything but great parts from 1A. Installation videos are really good and make installing the parts much easier.
October 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these come pre-greased?
Larry S October 29, 2018
These will come pregreased.
Emma F October 29, 2018
Nope, when I got mine they were dry as a bone and to short, not to mention there is no zerg fitting on them, Id suggest hitting up fab-tech, their tire rod ends were perfect
F R October 29, 2018
Year Make Model Description
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Quad Cab Inner & Outer Tie Rod 4 Piece Set
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Regular Cab Inner & Outer Tie Rod 4 Piece Set
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Inner & Outer Tie Rod 4 Piece Set
2011-2012Ram 1500 Truck Ram 1500 Truck Inner & Outer Tie Rod 4 Piece Set
Part #: 1ASFK02885


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:11 min)