Specifications:

  • Brand New Steering Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheels (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the wheel
  2. step : Remove the tie rod (1:32)
    • Mark the alignment on the tie rod with a sharpie.
    • Use two wrenches to loosen up the tie rod nut.
    • Remove the cotter pin and remove the 16 mm nut.
    • Use a tie rod puller to pry out the tie rod.
    • Unscrew the tie rod.
  3. step : Install the new tie rod (4:05)
    • Adjust the new locking nut to the same spot that the old one was (where you made your mark)
    • Screw in the new tie rod.
    • Install the cotter pin and bolt on the 17mm nut.
    • Install the cotterpin.
    • Use a grease gun to fill the joint.
  4. step : Replace the wheel (7:15)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 80 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Extremelly good! Best product ever, great company!
I Am very happy with the quality and how perfect everythings fitted, everything came as it should, fast delivery, i spoke to a representative, he was super helpful, great experience, i will definitely buy parts from this website again... thanks.
July 23, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Acura CL Inner & Outer Tie Rod with Rack & Pinion Bellows 6 Piece Set
  • 1994-1997 Honda Accord Inner & Outer Tie Rod with Rack & Pinion Bellows 6 Piece Set
  • 1995-1997 Honda Odyssey Inner & Outer Tie Rod with Rack & Pinion Bellows 6 Piece Set
  • 1996-1997 Isuzu Oasis Inner & Outer Tie Rod with Rack & Pinion Bellows 6 Piece Set

This part replaces:

  • Beck Arnley 103-2876
  • Beck Arnley 103-2865
  • OE # 53560SV4013
  • OE # 53540SV4013
  • OE # 53010SV4000
  • OE # 53534SL4J01, 53535SL5A01
  • OE # 53534S30003, 53534SV4003
  • Moog ES3391R
  • Moog ES3392R
  • Moog EV342
  • OE # 53560-SV4-013
  • OE # 53540-SV4-013
  • OE # 53010-SV4-000
Part #: 1ASFK02560

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:20 min)