Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:10)
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • Make note of this measurement
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 18mm nut from the outer tie rod end
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Hold the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (2:08)
    • Attach the grease fitting to the new outer tie rod
    • Tighten the grease fitting with a 7mm socket and ratchet
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the 18mm castle nut onto the outer tie rod
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Fill the tie rod with grease, using a grease gun
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • This should be the same as the measurement noted in Step 2
    • Tighten the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (3:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Grease Gun

4.2 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
9
2
0
0
2
Good
Great fit good price very easy to change. Good quality for the price.
May 28, 2018
Purchased
1 month ago
Awesome company
Love A1 auto i saved so much money purchasing auto parts through this company and learned alot from their online videos that gave me the confidence to do the mechanical work on my car myself. Once again thx A1 auto you guys are the best!
May 21, 2018
Purchased
1 month ago
Tie rods.
Garage wanted $465 for tie rods and installation. Less than $40 and with guidence of your videos it took about 45 minutes! I look forward to the next project and the satisfaction of saving so much money. If it wasn’t for 1 A auto my 2001 Yukon would have been junked a long time ago. I Just because of cost to have repaired.
May 4, 2018
Purchased
2 months ago
Great kit!
Great kit just wish the ball joints came with a grease fitting on them but with the warrenty from 1aauto I’ll just replace them if they ever need it
March 18, 2018
Purchased
1 year ago
Tie rod ends
Great deal everything went together perfectly .
Would recommend product.
November 20, 2017
Purchased
7 months ago
Tie rods
Fast shipping great parts. Good quality and easy to install.
November 2, 2017
Purchased
7 months ago
Shopping for products on 1aauto was a breeze I was able to do the shopping myself without a mechanic. Just put the info about vehicle and keyword on what I was looking for. Delivery was on tine and to my surprise they were the right parts thanks AAUTO. The ladies guide to ordering very inexpensive auto parts.
October 20, 2017
Purchased
8 months ago
Tie Rod
Hello 1aauto,

Thank you for my tie Rod. It was easy to put on thanks to your video. You guys are #1.

Aloha from Hawaii,
Jon
July 13, 2017
Purchased
11 months ago
tie Rod Ends
They had fast delivery and the fit was great on my 2001 Suburban. My son put them in and have had them on for about a month. with no problems. Price of parts was the lowest that we could find. Suburban has 210,222 miles on it and still going.
July 6, 2017
Purchased
1 year ago
Average
The threads are weak. Ended up buying moog rods from elsewhere
February 10, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 6 answers
What's the specific grease and fittings need to apply grease in the tie rods?
Lance B on Apr 5, 2016
BEST ANSWER: A standard ball joint grease can be used on all the front end steering components. This is available at any local auto parts store
Hi. I need to replace inner/outer tie rod ends on my 2005 silverado 1500 and the part number from gmc is
Inner- 15295861
Outer- 19289163
Could you send me a link with those tie rods?
Denis E on Sep 7, 2017
BEST ANSWER: While we have a cross reference for the inner tie rod ends, https://www.1aauto.com/tie-rod-pair/i/1asfk00231?f=605546&y=2005 we are unable to successfully locate the outer tie rod end based off of the OE number you provided. Do you have a 2WD model or 4WD model?
What type steel is it made from?
Chad C on Mar 23, 2017
BEST ANSWER: We do not have the specific steel type available at this time, but they are made designed to OE specifications in terms of materials.
Do these come with the grease fittings that are in the video or do they need to be ordered separate?
Daniel F on Jan 18, 2017
BEST ANSWER: From what we may see, the outer tie rod ends will be sealed from our vendor, and do not require grease to be added during routine maintenance. We do use multiple vendors however, and if our vendors offer an opening on the outer tie rod, the grease fitting will be included. You will not have to purchase them separately.

Vehicle Fit

  • 2002-2006 Cadillac Escalade Tie Rod 4 Piece Set Inner & Outer
  • 2003-2006 Cadillac Escalade ESV Tie Rod 4 Piece Set Inner & Outer
  • 2002-2006 Cadillac Escalade EXT Tie Rod 4 Piece Set Inner & Outer
  • 2002-2006 Chevy Avalanche 1500 Tie Rod 4 Piece Set Inner & Outer
  • 1999-2006 Chevy Silverado 1500 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer
  • 2004-2006 Chevy Silverado 1500 2 Wheel Drive Tie Rod 4 Piece Set for Models without Rack & Pinion Steering Inner & Outer
  • 2007 Chevy Silverado 1500 Classic 2 Wheel Drive Tie Rod 4 Piece Set for Models without Rack & Pinion Steering Inner & Outer
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer
  • 1999-2000 Chevy Silverado 2500 Tie Rod 4 Piece Set Inner & Outer
  • 2000-2006 Chevy Suburban 1500 Tie Rod 4 Piece Set Inner & Outer
  • 2000 Chevy Suburban 2500 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer
  • 2000 Chevy Tahoe Tie Rod 4 Piece Set Inner & Outer (excluding Z71 Models)
  • 2001-2006 Chevy Tahoe Tie Rod 4 Piece Set Inner & Outer
  • 1999-2006 GMC Sierra 1500 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer
  • 2004-2006 GMC Sierra 1500 2 Wheel Drive Tie Rod 4 Piece Set for Models without Rack & Pinion Steering Inner & Outer
  • 2007 GMC Sierra 1500 Classic 2 Wheel Drive Tie Rod 4 Piece Set for Models without Rack & Pinion Steering Inner & Outer
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer
  • 1999-2000 GMC Sierra 2500 Tie Rod 4 Piece Set Inner & Outer
  • 2000 GMC Yukon Tie Rod 4 Piece Set Inner & Outer (excluding Denali Models)
  • 2001-2006 GMC Yukon Tie Rod 4 Piece Set Inner & Outer
  • 2000-2006 GMC Yukon XL 1500 Tie Rod 4 Piece Set Inner & Outer
  • 2000 GMC Yukon XL 2500 4 Wheel Drive Tie Rod 4 Piece Set Inner & Outer

This part replaces:

  • OE # 15295861
  • OE # 19149617
  • OE # 26059210
  • Moog ES3488
  • Moog ES3493T
Part #: 1ASFK00399

How-to Video:

(04:28 min)