Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

These outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Replaces one of many dealer part numbers including: MB912519, 56820-22000, 5682022000
  • Connect to inner tie rods
  • Direct replacements
  • Built to strict quality control standards
  • Grease-able

Note: This listing is for two tie rod ends. If you only need one, please our other listings.

When installed correctly and if an alignment is performed, this inner tie rod could also reduce uneven tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:35)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (0:59)
    • Turn the wheels by hand for better access to the tie rod
    • Remove the cotter pin from the outer tie rod with pliers
    • Remove the castle nut from the tie rod with an adjustable wrench
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Loosen the nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the outer tie rod
    • Lift the outer tie rod out of the wheel knuckle
    • Twist off the outer tie rod
  3. step : Removing the Inner Tie Rod (1:59)
    • Twist off the nut that connects the outer to the inner tie rod
    • Pull the small boot clamp off the inner tie rod with pliers
    • Pry off the large boot clamp with a hammer and a flat blade screwdriver
    • Pull off the boot
    • Remove the inner tie rod with a pipe wrench
  4. step : Installing the New Inner Tie Rod (2:46)
    • Twist the new inner tie rod into place
    • Put a wire tie on the large end of the boot
    • Put the boot into place
    • Tighten the wire tie
    • Push on the small boot clamp with pliers
    • Twist on the nut that connects the outer to the inner tie rod
  5. step : Reinstalling the Outer Tie Rod (3:43)
    • Twist your outer tie rod onto the inner tie rod
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • This should be the same measurement as noted in Step 2
    • Thread the nut that connects the outer to the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Line up the castle nut with the cotter pin hole
    • Push the cotter pin into place
    • Twist the cotter pin into place with pliers
    • Tighten the nut that connects the outer to the inner tie rod
    • Fill the outer tie rod bearing with bearing grease, using a grease gun
  6. step : Reattaching the Wheel (4:56)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Pipe Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Grease Gun

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995Chrysler Sebring Chrysler Sebring Front Outer Tie Rod Pair
1996-2005Chrysler Sebring Chrysler Sebring Coupe Front Outer Tie Rod Pair
1995-2000Dodge Avenger Dodge Avenger Front Outer Tie Rod Pair
1984-1991Dodge Colt Dodge Colt Vista L4 2.0L Front Outer Tie Rod Pair
1991-1996Dodge Stealth Dodge Stealth Front Wheel Drive Front Outer Tie Rod Pair
2001-2005Dodge Stratus Dodge Stratus Coupe Front Outer Tie Rod Pair
1993-1996Eagle Summit Eagle Summit Wagon Front Outer Tie Rod Pair
1990-1998Eagle Talon Eagle Talon Front Outer Tie Rod Pair
1992Hyundai Elantra Hyundai Elantra (Built After 4/21/92 Production Date) 14mm Thread Pitch Tie Rod Front Outer Tie Rod Pair
1993-1995Hyundai Elantra Hyundai Elantra 14mm Thread Pitch Tie Rod Front Outer Tie Rod Pair
1989-1994Hyundai Sonata Hyundai Sonata Front Outer Tie Rod Pair
1986-1989Mazda 323 Mazda 323 Power Steering Front Outer Tie Rod Pair
1991-1999Mitsubishi 3000GT Mitsubishi 3000GT Front Wheel Drive Front Outer Tie Rod Pair
1983-1988Mitsubishi Cordia Mitsubishi Cordia Front Wheel Drive Front Outer Tie Rod Pair
1992-2004Mitsubishi Diamante Mitsubishi Diamante Front Outer Tie Rod Pair
1990-2005Mitsubishi Eclipse Mitsubishi Eclipse Front Outer Tie Rod Pair
1992-1994Mitsubishi Expo Mitsubishi Expo Front Outer Tie Rod Pair
1985-2003Mitsubishi Galant Mitsubishi Galant Front Outer Tie Rod Pair
1989-1990Mitsubishi Sigma Mitsubishi Sigma without Rear Wheel Steering Front Outer Tie Rod Pair
1992-1993Plymouth Colt Plymouth Colt Vista Front Outer Tie Rod Pair
1990-1994Plymouth Laser Plymouth Laser Power Steering Front Outer Tie Rod Pair
Part #: 1ASFK00173


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:28 min)