These front outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Replaces one of many dealer part numbers including: 19149617
  • Connects to relay rod
  • Direct replacements
  • Built to strict quality control standards
  • Not correct for HD (Heavy Duty) models

Note: For 2007 Silverado / Sierra, these fit the Old or Classic body style, not the New style truck. The Classic style truck has a crease that runs down the center of the door skin. New body styles have a smooth door skin.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:10)
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • Make note of this measurement
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 18mm nut from the outer tie rod end
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Hold the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (2:08)
    • Attach the grease fitting to the new outer tie rod
    • Tighten the grease fitting with a 7mm socket and ratchet
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the 18mm castle nut onto the outer tie rod
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Fill the tie rod with grease, using a grease gun
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • This should be the same as the measurement noted in Step 2
    • Tighten the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (3:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Grease Gun

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Appreciated
I like the tie rods I appreciate your business 1Aauto recommend to anyone always done me right. Great prices and quick shipping couldn't ask for no better
September 12, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Cadillac Escalade Front Outer Tie Rod Pair
  • 2003-2006 Cadillac Escalade ESV Front Outer Tie Rod Pair
  • 2002-2006 Cadillac Escalade EXT Front Outer Tie Rod Pair
  • 2002-2006 Chevy Avalanche 1500 Front Outer Tie Rod Pair
  • 1999-2006 Chevy Silverado 1500 4 Wheel Drive Front Outer Tie Rod Pair
  • 2004-2006 Chevy Silverado 1500 2 Wheel Drive Front Outer Tie Rod Pair for Models without Rack & Pinion Steering
  • 2007 Chevy Silverado 1500 Classic 2 Wheel Drive Front Outer Tie Rod Pair for Models without Rack & Pinion Steering
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Front Outer Tie Rod Pair
  • 1999-2000 Chevy Silverado 2500 Front Outer Tie Rod Pair
  • 2001-2006 Chevy Suburban 1500 Front Outer Tie Rod Pair
  • 2000 Chevy Suburban 2500 Front Outer Tie Rod Pair
  • 2000 Chevy Tahoe Front Outer Tie Rod Pair (excluding Z71 Models)
  • 2001-2006 Chevy Tahoe Front Outer Tie Rod Pair
  • 1999-2006 GMC Sierra 1500 4 Wheel Drive Front Outer Tie Rod Pair
  • 2004-2006 GMC Sierra 1500 2 Wheel Drive Front Outer Tie Rod Pair for Models without Rack & Pinion Steering
  • 2007 GMC Sierra 1500 Classic 2 Wheel Drive Front Outer Tie Rod Pair for Models without Rack & Pinion Steering
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Front Outer Tie Rod Pair
  • 1999-2000 GMC Sierra 2500 Front Outer Tie Rod Pair
  • 2000 GMC Yukon Front Outer Tie Rod Pair (excluding Denali Models)
  • 2001-2006 GMC Yukon Front Outer Tie Rod Pair
  • 2000 GMC Yukon XL 1500 Front Outer Tie Rod Pair
  • 2001-2006 GMC Yukon XL 1500 Front Outer Tie Rod Pair
  • 2000 GMC Yukon XL 2500 Front Outer Tie Rod Pair

This part replaces:

  • Moog ES3493T
  • OE # 19149617
Part #: 1ASFK00398

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:28 min)