Replaces

Tie Rod Front - 1ASFK02060

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Front or Rear Location:   Front

These Tie Rod Ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT INNER & OUTER
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (3:45)
    • Turn the wheel by hand to check for play in the tie rod
    • Check for a gap in movement between the tie rod and spindle
    • Listen for a clunking sound from the tie rod
    • Measure the distance from the steering rack bellow to the lock nut
    • Record this measurement
    • Alternatively, mark the inner tie rod threads against the lock nut with a marker
    • Straighten out the cotter pin with needle nose pliers
    • Pull the cotter pin out of the castle nut
    • Loosen the castle nut from the tie rod with a 17mm socket and ratchet
    • Apply penetrating oil to the lock nut
    • Loosen the lock nut with a 22mm wrench
    • Tap the tie rod loose from the spindle with a hammer
    • Remove the castle nut
    • Tap the tie rod out of the spindle
    • Hold the inner tie rod with a 14mm wrench if necessary
    • Twist the outer tie rod off the inner tie rod with a 19mm wrench
    • Twist off the lock nut by hand
  3. step : Installing the Outer Tie Rod (8:07)
    • If you marked the inner tie rod, spin the lock nut to match the paint line
    • If you took a measurement, spin the lock nut to the correct distance from the steering bellow
    • Spin the outer tie rod onto the inner tie rod until it reaches the lock nut
    • Push the tie rod stud into the wheel spindle
    • Torque the tie rod nut to 36 foot-pounds
    • Install the new cotter pin with the longer leg facing down
    • Bend the cotter pin under the nut with pliers
    • Turn the inner tie rod with a 14mm wrench if it needs to be adjusted
    • Hold the inner tie rod with a 14mm wrench
    • Tighten the lock nut with a 22mm wrench
  4. step : Reattaching the Wheel (11:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 14mm Wrench
  • 19mm Wrench

5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
On time and perfect fit
Ordering was easy, my parts arrived one day earlier than I expected. The parts fit perfect and my 98 sienna drives like new again.
February 6, 2018
Make lemonade
An asshole that knows the cops in my town hits my parked car on a 3o foot wide double lined straight road in Denville New Jersey. I am parked in the wrong direction because I am helping a friend with a battery Jump. This A hole hits my parked car (off and locked) and puts it onto the sidewalk. His insurance company says I am at fault because it was parked the wrong way. The A hole that hits my parked locked (not running) car does not get a ticket for careless driving but I get a parking ticket. So the whole thing is my fault. These guys helped me get my car running again and at a great price. Use them, They helped me make lemonade our of a lemon situation.
February 11, 2018
Excellent product
Could have not asked for a better product, fit, price, shipment, these guys have it all. This was my first purchase, always trust the how to videos on Youtube, now Ill be a loyal customer. Good job guys!
May 31, 2018
good quality parts NO BS!!
i do alot with my dirt bikes and cars using online purchases, and u guys rock!! thank u
December 4, 2018
Excellent products
Excellent productsAnd customer serviceWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
January 6, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will the outer piece require a grease fill?
William C December 17, 2015
Yes the grease fitting will come with the outer ie rod.
Wesley C October 15, 2016
Year Make Model Description
1992-2000Lexus ES300 Lexus ES300 Front Inner & Outer Tie Rod 4 Piece Set
2001Lexus ES300 Lexus ES300 Front Inner & Outer Tie Rod 4 Piece Set (Built Before 7/01 Production Date)
1995-2004Toyota Avalon Toyota Avalon Front Inner & Outer Tie Rod 4 Piece Set
1992-2000Toyota Camry Toyota Camry Front Inner & Outer Tie Rod 4 Piece Set
2001Toyota Camry Toyota Camry Front Inner & Outer Tie Rod 4 Piece Set (Built Before 7/01 Production Date)
1998-2002Toyota Sienna Toyota Sienna Front Inner & Outer Tie Rod 4 Piece Set
2003Toyota Sienna Toyota Sienna Front Inner & Outer Tie Rod 4 Piece Set (Built Before 1/03 Production Date)
1999-2003Toyota Solara Toyota Solara Front Inner & Outer Tie Rod 4 Piece Set
Part #: 1ASFK02060


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:51 min)