Part Details

  • Quantity: Pair
  • Front or Rear Location: Front
  • Location: Outer

These tie rods are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Replaces dealer part numbers: AL2Z3A130A, 6L2Z3A130AA, AL2Z 3A130 A, 6L2Z 3A130 AA
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:49)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Slide off the wheel
  2. step : Removing the Outer Tie Rod (1:15)
    • Apply rust penetrant to the tie rod end
    • Loosen the 21mm jam nut on the outer tie rod
    • Remove the 19mm nut from the tie rod ball joint
    • Tap the wheel knuckle with a hammer to loosen the tie rod ball joint stud
    • Remove the tie rod from the wheel knuckle twist the outer tie rod off
    • Count the number of turns it takes to remove the tie rod
    • Hold the inner tie rod with locking pliers
    • Mark one side of the jam nut
    • Twist off the jam nut
    • Count how many turns it takes to remove the jam nut
  3. step : Installing the Outer Tie Rod (3:31)
    • Apply anti-seize grease to the outer tie rod and the jam nut
    • Thread on the jam nut
    • Apply anti-seize grease to the inner tie rod
    • Thread the outer tie rod on the number of turns you counted in Step 2
    • Turn the jam rod to the edge of the tie rod
    • Push the tie rod stud into the wheel knuckle
    • Thread the 22mm nut onto the stud
    • Torque the 22mm nut to 52 foot-pounds
  4. step : Installing the Wheel (5:39)
    • Slide the wheel into place
    • Start the five 19mm lug nuts
    • Lower the vehicle to the ground
    • Torque the lug nuts to 100 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2010Ford Explorer Ford Explorer Pair Tie Rod Outer Front
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Pair Tie Rod Front Outer
2006-2010Mercury Mountaineer Mercury Mountaineer Pair Tie Rod Front Outer

This part replaces:

  • Moog ES80786
  • OE # 6L2Z3A130AA
  • OE # AL2Z3A130A
Part #: 1ASFK01509


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:23 min)