Replaces

Tie Rod Adjusting Sleeve Front Pair - 1ASFK01395

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

These Tie Rod Adjusting Sleeves are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: F65Z3281BA, F65Z3281AA, F65Z 3281 BA, F65Z 3281 AA
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:25)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Slide the wheel off the hub
  2. step : Removing the Outer Tie Rod End (0:55)
    • Remove the cotter pin from the castle nut
    • Remove the castle nut with a 13/16" wrench
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Twist the tie rod end off the inner tie rod, counting how many rotations it takes to remove
  3. step : Removing the Tie Rod Adjusting Sleeve (2:20)
    • Loosen the adjuster sleeve from the inner tie rod with a 24mm wrench
    • Twist the adjusting sleeve off the inner tie rod
  4. step : Installing the Tie Rod Adjusting Sleeve (2:50)
    • Thread the wider diameter side of the adjusting sleeve onto the inner tie rod
    • Tighten the sleeve up to the jam nut while holding the inner tie rod in place
  5. step : Installing the Outer Tie Rod End (3:49)
    • Start the tie rod end into the adjuster sleeve
    • Turn the tie rod end in, the same number of turns it took to remove
    • Line up the tie rod end into the wheel knuckle
    • Fasten the castle nut onto the tie rod end
    • Line up the castle nut with the hole in the tie rod end
    • Feed the cotter pin through the hole
    • Bend the cotter pin with pliers to secure it
    • Tighten the jam nuts with a 27mm wrench
  6. step : Installing the Wheel (5:33)
    • Slide the wheel onto the hub
    • Start the lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 83 and 112 foot-pounds of torque in a star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 24mm Wrench
  • 27mm Wrench

  • Wrenches - SAE

  • 13/16 Inch Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2002Ford Expedition Ford Expedition Pair Tie Rod Adjusting Sleeve Front
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Pair Tie Rod Adjusting Sleeve Front
1997-2003Ford F150 Truck Ford F150 Truck Pair Tie Rod Adjusting Sleeve Front
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Pair Tie Rod Adjusting Sleeve Front
2002Lincoln Blackwood Lincoln Blackwood Pair Tie Rod Adjusting Sleeve Front
1998-2002Lincoln Navigator Lincoln Navigator Pair Tie Rod Adjusting Sleeve Front
Part #: 1ASFK01395


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:29 min)