Specifications:

  • Brand New Mopar Throttle Body Assembly
  • Original equipment part
  • Throttle Position Sensor included

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Throttle Body (1:01)
    • Open the hood
    • Loosen the intake hose clamp with a flat blade screwdriver
    • Pull the coolant hose out of its bracket
    • Remove the MAP sensor from the air intake
    • Disconnect the throttle body wiring harness
    • Pull the intake hose off the throttle body
    • Remove the two 10mm nuts from the throttle body
    • Remove the two 15mm bolts from the throttle body bracket
    • Remove the bracket from the throttle body
    • Remove the four 10mm bolts from the throttle body
    • Pull the throttle body off the intake manifold
  2. step : Installing the Throttle Body (3:46)
    • Put the throttle body onto the intake manifold using the locating tabs
    • Insert the two studded 10mm bolts onto the firewall side of the throttle body
    • Insert the two regular 10mm bolts onto the grille side of the throttle body
    • Connect the throttle body wiring harness
    • Put the throttle body bracket into place
    • Fasten the two 10mm nuts onto the throttle body
    • Insert the two 15mm bolts into the throttle body bracket
    • Connect the air intake hose to the throttle body
    • Tighten the intake hose clamp with a flat blade screwdriver
    • Push the coolant hose onto its bracket
    • Push the MAP sensor into the intake hose
    • Close the hood

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 Throttle Body Assembly with Throttle Position Sensor V6 2.7L Mopar 4861691AA
  • 2005-2010 Chrysler 300 Throttle Body Assembly with Throttle Position Sensor V6 3.5L Mopar 4861691AA
  • 2007-2008 Chrysler Pacifica Throttle Body Assembly with Throttle Position Sensor V6 4.0L Mopar 4861691AA
  • 2006-2010 Chrysler Sebring Throttle Body Assembly with Throttle Position Sensor V6 2.7L Mopar 4861691AA
  • 2007-2010 Chrysler Sebring Throttle Body Assembly with Throttle Position Sensor V6 3.5L Mopar 4861691AA
  • 2008-2010 Chrysler Town & Country Throttle Body Assembly with Throttle Position Sensor V6 4.0L Mopar 4861691AA
  • 2008-2010 Dodge Avenger Throttle Body Assembly with Throttle Position Sensor V6 2.7L Mopar 4861691AA
  • 2008-2010 Dodge Avenger Throttle Body Assembly with Throttle Position Sensor V6 3.5L Mopar 4861691AA
  • 2008-2010 Dodge Grand Caravan Throttle Body Assembly with Throttle Position Sensor V6 4.0L Mopar 4861691AA

This part replaces:

  • Mopar 4861691AA
Only 2 left in stock
Part #: MPTBA00004

Brand #: 4861691AA

How-to Video:

(06:03 min)