This replacement tail light is just what you need to get your vehicle in good looking form again!

This tail light features:

  • Assembly includes lens and housing
  • Replaces dealer part number: 15113579
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:54)
    • Remove the two Phillips screws on the side of the taillight.
    • Pull the light out and off.
  2. step : Changing the Bulbs (1:17)
    • Push in the tab and twist out the sockets.
    • Pull the bulb straight out.
    • Push the new one in.
    • Twist the socket back into place.
  3. step : Replacing the Taillight Assembly (1:35)
    • Twist out all of the sockets.
    • Unclip the harness from the taillight.
    • Twist off the rubber guide.
    • Twist the rubber guide onto the new light.
    • Twist all of the sockets into place.
    • Re-clip the harness to the light.
    • Line up the taillight and push it into place.
    • Replace the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-2004 Chevy Blazer S10 Tail Light Passenger Side
  • 1998-2000 GMC Envoy Tail Light Passenger Side
  • 1995-2001 GMC Jimmy S-15 Tail Light Passenger Side
  • 1996-2001 Olds Bravada Tail Light Passenger Side

This part replaces:

  • Hollander 166-1560R
  • OE # 15113580
  • DEPO 332-1921R-US
Part #: 1ALTL00592

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:55 min)