Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

These replacement taillights are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 10343358, 10343359
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacements
  • Does not include bulbs or circuit boards

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

These taillights make great replacements and have good cost savings over dealer units.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight (0:54)
    • Remove the T30 bolts from the taillight.
    • Pull the taillight out.
    • Pull the clip on the harness free from the assembly.
    • Pry back the four tabs and pop the plate out.
    • Disconnect the harness.
  2. step : Replacing the Bulbs (2:22)
    • Pull the bulb straight out.
    • Push a new bulb into place.
  3. step : Replacing the Taillight (2:58)
    • Push the connector plate back into the taillight.
    • Connect the harness.
    • Clip the harness back to the assembly.
    • Push the taillight into place.
    • Replace the T30 bolts.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2005Chevy Venture Chevy Venture Tail Light Pair
1997-2004Oldsmobile Silhouette Olds Silhouette Tail Light Pair
1999-2004Pontiac Montana Pontiac Montana Tail Light Pair
2005Pontiac Montana Pontiac Montana Base Model Tail Light Pair
1997-1998Pontiac Trans Sport Pontiac Trans Sport Tail Light Pair
Only 5 left in stock
Part #: 1ALTP00019


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:29 min)