This replacement tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Circuit Board not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:32)
    • Remove the two screws that secure the taillight
    • Pull the taillight straight out.
    • Disconnect the harness.
  2. step : Replacing the bulbs (1:58)
    • Remove the two screws on the connector board.
    • Pull the bulb you want to replace out. Push the new one in.
    • Replace the connector board and the two screws to secure it.
  3. step : Replacing the Taillight Assembly (2:14)
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the two screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Cadillac Escalade Tail Light Driver Side without Circuit Board
  • 1992-1994 Chevy Blazer Full Size Tail Light Driver Side without Circuit Board
  • 1988-1999 Chevy C1500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2000 Chevy C2500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2001 Chevy C3500 Truck Tail Light Driver Side without Circuit Board
  • 1988-1999 Chevy K1500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2000 Chevy K2500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2000 Chevy K3500 Truck Tail Light Driver Side without Circuit Board
  • 1992-1999 Chevy Suburban C1500 Tail Light Driver Side without Circuit Board
  • 1992-1999 Chevy Suburban C2500 Tail Light Driver Side without Circuit Board
  • 1992-1999 Chevy Suburban K1500 Tail Light Driver Side without Circuit Board
  • 1992-1999 Chevy Suburban K2500 Tail Light Driver Side without Circuit Board
  • 1995-1999 Chevy Tahoe Tail Light Driver Side without Circuit Board
  • 2000 Chevy Tahoe Tail Light without Circuit Board V8 5.7L Driver Side
  • 1988-1999 GMC C1500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2000 GMC C2500 Truck Tail Light without Circuit Board Driver Side
  • 1988-2001 GMC C3500 Truck Tail Light without Circuit Board Driver Side
  • 1988-1999 GMC K1500 Truck Tail Light Driver Side without Circuit Board
  • 1988-2000 GMC K2500 Truck Tail Light without Circuit Board Driver Side
  • 1988-2000 GMC K3500 Truck Tail Light without Circuit Board Driver Side
  • 1992-1999 GMC Suburban C1500 Tail Light Driver Side without Circuit Board
  • 1992-1999 GMC Suburban C2500 Tail Light Driver Side without Circuit Board
  • 1992-1999 GMC Suburban K1500 Tail Light Driver Side without Circuit Board
  • 1992-1999 GMC Suburban K2500 Tail Light Driver Side without Circuit Board
  • 1995-1999 GMC Yukon Tail Light Driver Side without Circuit Board
  • 2000 GMC Yukon Tail Light without Circuit Board V8 5.7L Driver Side

This part replaces:

  • Partslink GM2808108
  • Hollander 166-1330L
  • OE # 16506355
  • TYC 11-1914-01
  • DEPO 332-1914L-US
Part #: 1ALTL00059



How-to Video:

(04:23 min)