This tail light circuit connector board is just what you need to get your tail light working again!

Specifications:

  • RH (Passenger Side)
  • High quality item that is built to strict quality control standards
  • Direct bolt on ~ Easy to install
  • Replaces burnt and malfunctioning circuit boards
  • Allows for just replacement of defective part instead of entire Tail light
  • Does not fit 88-91 R/V series trucks - These have a vent glass in the front door
  • Does not fit 99-01 Silverado or Sierra new body style pickups

This tail light circuit connector board makes a great replacement and has good cost savings over a dealer circuit board.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:32)
    • Remove the two screws that secure the taillight
    • Pull the taillight straight out.
    • Disconnect the harness.
  2. step : Replacing the bulbs (1:58)
    • Remove the two screws on the connector board.
    • Pull the bulb you want to replace out. Push the new one in.
    • Replace the connector board and the two screws to secure it.
  3. step : Replacing the Taillight Assembly (2:14)
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the two screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
0
0
0
Perfect fit
Replacement taillight assembly fit like original part. Was pleasant surprise that bulbs were included.
December 31, 2017
Purchased
5 months ago
Part ordered and deliverd as promised
Found your site through DIY vids on YouTube. Ordered a new part I needed, cheaper than it would have been from a junkyard and with free shipping! Came in a couple days and works perfectly.
Thank you. We will be doing more business with each other soon and often.
December 7, 2017
Purchased
6 months ago
Arrived earlier than expected
It was the part we needed. Came with the bulb which in description it said no bulb so that was a nice surprise. One was broken sure to soft pkg but didn't matter because we weren't expecting and already had the bulb. We will definitely use you again! Thank you!
October 24, 2017
Purchased
8 months ago
I totally recommend this website and products . I ordered a rear end light bulb set for a 1996 year car and I didn't think they would have it but they did and it worked perfectly so I'm satisfied with the product and the services given.
September 28, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
Does this come with the bulbs installed?
shevon a on Sep 24, 2016
BEST ANSWER: It may have bulbs installed but are NOT warrantied. What you are actually buying is the circuit board

Vehicle Fit

  • 1999-2000 Cadillac Escalade Tail Light Circuit Board Passenger Side
  • 1992-1994 Chevy Blazer Full Size Tail Light Circuit Board Passenger Side
  • 1988-1999 Chevy C1500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 Chevy C2500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2001 Chevy C3500 Truck Tail Light Circuit Board Passenger Side
  • 1988-1999 Chevy K1500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 Chevy K2500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 Chevy K3500 Truck Tail Light Circuit Board Passenger Side
  • 1992-1999 Chevy Suburban C1500 Tail Light Circuit Board Passenger Side
  • 1992-1999 Chevy Suburban C2500 Tail Light Circuit Board Passenger Side
  • 1992-1999 Chevy Suburban K1500 Tail Light Circuit Board Passenger Side
  • 1992-1999 Chevy Suburban K2500 Tail Light Circuit Board Passenger Side
  • 1995-1999 Chevy Tahoe Tail Light Circuit Board Passenger Side
  • 2000 Chevy Tahoe V8 5.7L Tail Light Circuit Board Passenger Side
  • 1988-2000 GMC C1500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 GMC C2500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2001 GMC C3500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 GMC K1500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 GMC K2500 Truck Tail Light Circuit Board Passenger Side
  • 1988-2000 GMC K3500 Truck Tail Light Circuit Board Passenger Side
  • 1992-1999 GMC Suburban C1500 Tail Light Circuit Board Passenger Side
  • 1992-1999 GMC Suburban C2500 Tail Light Circuit Board Passenger Side
  • 1992-1999 GMC Suburban K1500 Tail Light Circuit Board Passenger Side
  • 1992-1999 GMC Suburban K2500 Tail Light Circuit Board Passenger Side
  • 1995-1999 GMC Yukon Tail Light Circuit Board Passenger Side
  • 2000 GMC Yukon V8 5.7L Tail Light Circuit Board Passenger Side

This part replaces:

  • Partslink GM2807101
  • OE # 16511566
  • Dorman 923-002
  • TYC 11-1913-20
  • DEPO 17-332-1914RB
Part #: 1ALTL00064

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:23 min)