This tail light circuit connector board is just what you need to get your tail light working again!

Specifications:

  • LH (Driver Side)
  • High quality item that is built to strict quality control standards
  • Direct bolt on ~ Easy to install
  • Replaces burnt and malfunctioning circuit boards
  • Allows for just replacement of defective part instead of entire Tail light
  • Does not fit 88-91 R/V series trucks - These have a vent glass in the front door
  • Does not fit 99-01 Silverado or Sierra new body style pickups

This tail light circuit connector board makes a great replacement and has good cost savings over a dealer circuit board.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:32)
    • Remove the two screws that secure the taillight
    • Pull the taillight straight out.
    • Disconnect the harness.
  2. step : Replacing the bulbs (1:58)
    • Remove the two screws on the connector board.
    • Pull the bulb you want to replace out. Push the new one in.
    • Replace the connector board and the two screws to secure it.
  3. step : Replacing the Taillight Assembly (2:14)
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the two screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
0
0
0
1ALTL00063-Tail Light Circuit Board Driver Side
Very pleased with this tail light circuit board. Fit was perfect for my 1999 K1500 Suburban, and included the lamps...great price.
February 14, 2018
Purchased
4 months ago
The No. 1 Source For Your Auto Parts
I have used 1A Auto Parts on several occasions and not once have I been disappointed. The parts fit as they should and arrive in a timely manner.
Customer service is outstanding. Ordering throught the website is very easy. Give it a try. If you're not happy with the part give customer service an opportunity to try and remedy the problem.
December 11, 2017
Purchased
6 months ago
Great
I had no problems and I got my order in a promptly Manner and it was great
December 1, 2017
Purchased
6 months ago
Superior Replacement Part
Superior replacement part for my 91 Chevy K1500. The gasket and overall quality is far superior to the original party that I took out. Super easy to install, with only a screwdriver needed for tools.
August 4, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Cadillac Escalade Tail Light Circuit Board Driver Side
  • 1992-1994 Chevy Blazer Full Size Tail Light Circuit Board Driver Side
  • 1988-1999 Chevy C1500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 Chevy C2500 Truck Tail Light Circuit Board Driver Side
  • 1988-2001 Chevy C3500 Truck Tail Light Circuit Board Driver Side
  • 1988-1999 Chevy K1500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 Chevy K2500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 Chevy K3500 Truck Tail Light Circuit Board Driver Side
  • 1992-1999 Chevy Suburban C1500 Tail Light Circuit Board Driver Side
  • 1992-1999 Chevy Suburban C2500 Tail Light Circuit Board Driver Side
  • 1992-1999 Chevy Suburban K1500 Tail Light Circuit Board Driver Side
  • 1992-1999 Chevy Suburban K2500 Tail Light Circuit Board Driver Side
  • 1995-1999 Chevy Tahoe Tail Light Circuit Board Driver Side
  • 2000 Chevy Tahoe V8 5.7L Tail Light Circuit Board Driver Side
  • 1988-2000 GMC C1500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 GMC C2500 Truck Tail Light Circuit Board Driver Side
  • 1988-2001 GMC C3500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 GMC K1500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 GMC K2500 Truck Tail Light Circuit Board Driver Side
  • 1988-2000 GMC K3500 Truck Tail Light Circuit Board Driver Side
  • 1992-1999 GMC Suburban C1500 Tail Light Circuit Board Driver Side
  • 1992-1999 GMC Suburban C2500 Tail Light Circuit Board Driver Side
  • 1992-1999 GMC Suburban K1500 Tail Light Circuit Board Driver Side
  • 1992-1999 GMC Suburban K2500 Tail Light Circuit Board Driver Side
  • 1995-1999 GMC Yukon Tail Light Circuit Board Driver Side
  • 2000 GMC Yukon V8 5.7L Tail Light Circuit Board Driver Side

This part replaces:

  • Partslink GM2806101
  • OE # 16511565
  • Dorman 923-001
  • TYC 11-1914-20
  • DEPO 17-332-1914LB
Part #: 1ALTL00063

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:23 min)