These replacement taillight circuit boards are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 12335926, 12335927
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards

These taillight circuit boards make great replacements and have good cost savings over the dealer units.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Taillight Connector Plate (0:52)
    • Remove the T30 bolts from the taillight.
    • Pull the taillight out.
    • Pull the clip on the harness free from the assembly.
    • Pry back the tabs and pop the plate out.
    • Disconnect the harness.
  2. step : Replacing the Taillight Connector Plate (2:43)
    • Put the two double filament bulbs into the top and bottom socket on the new connector plate.
    • Put the single filament in the center spots on the new connector plate.
    • Push the connector plate back into the taillight.
    • Connect the harness.
    • Clip the harness back to the assembly.
    • Push the taillight into place.
    • Replace the T30 bolts.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
how do i order new plugs with circuit boards?
Richard S on Aug 17, 2016
BEST ANSWER: Plugs are not avail from 1A Auto. Maybe Ebay or salvage yard

Vehicle Fit

  • 1997-2005 Chevy Venture Tail Light Circuit Board Pair
  • 1997-2004 Olds Silhouette Tail Light Circuit Board Pair
  • 1999-2004 Pontiac Montana Tail Light Circuit Board Pair
  • 2005 Pontiac Montana Base Model Tail Light Circuit Board Pair
  • 1997-1998 Pontiac Trans Sport Tail Light Circuit Board Pair

This part replaces:

  • Partslink GM2817100, GM2817101
Part #: 1ALTP00760

How-to Video:

(05:31 min)