Replaces

Sway Bar Link - 1ASSL00583

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Sway Bar Link
  • Fits LH (Driver Side) or RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    If you're just replacing one sway bar link, you'll need to disconnect the bottom of the opposite side after loosening We recommend replacing these in pairs

  1. step : Removing the Sway Bar Link (0:33)
    • Raise and secure the vehicle on jack stands
    • Shoot the threads with rust penetrant
    • Hold the 15mm hex with a 15mm wrench
    • Remove the bolt from the top with a 17mm deep socket and ratchet
    • Insert an 18mm wrench onto the bottom hex bolt
    • Remove the 18mm nut with an 18mm six-point socket and ratchet
    • Remove the lower nut
    • Repeat the process for the opposite lower end
    • Push your sway bar up and remove the links
    • If the sway bar won't budge, loosen the bracket bolts
    • Pull the sway bar up
    • Remove the top nut on the opposite side
    • Remove the opposite sway bar link
  2. step : Installing the Sway Bar Link (4:07)
    • Remove the nut, washer, and rubber bumper from the top
    • Insert the sway bar links into place
    • Hand-tighten the nut, washer and bumper on both sides for the top
    • Push the sway bar into place
    • Insert the sway bar end links into the control arms
    • Loosely install the nuts on the bottom of the sway bar end links
    • Insert a 15mm wrench to the hex nut
    • Tighten the 16mm nut on the top
    • Insert an 18mm wrench into the hex nut
    • Tighten the 18mm nut to the bottom
    • Repeat these steps on the opposite side
    • Tighten any sway bar bushing bolts if you loosened them
    • Torque the sway bar bushing bolts to 45 foot-pounds
    • Lower the vehicle to the ground

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Wheel Drive Front Sway Bar Link Driver or Passenger Side
2011-2013Ram 1500 Truck Ram 1500 Truck Rear Wheel Drive Front Sway Bar Link Driver or Passenger Side
2011-2013Ram 2500 Truck Ram 2500 Truck Rear Wheel Drive Front Sway Bar Link Driver or Passenger Side
2011-2012Ram 3500 Truck Ram 3500 Truck Rear Wheel Drive Front Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00583


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:16 min)