Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) REAR
  • Includes bolt, bushings, and washers
  • Replaces dealer part number: 1L2Z5495BA, 1L2Z 5495 BA
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:38)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:05)
    • Hold the upper stabilizer link stud with a 16mm socket and ratchet
    • Remove the upper nut from the stabilizer link with a 15mm socket and ratchet
    • Hold the lower stabilizer link stud with a 15mm socket and ratchet
    • Remove the lower nut from the stabilizer link 16mm socket and ratchet
    • Pull off the stabilizer link
  3. step : Reinstalling the Stabilizer Link (3:08)
    • Place a washer and a bushing onto the link
    • Push the stabilizer link into place
    • Add a bushing, a washer, a tube, a washer, and a bushing
    • Push the link through the sway bar
    • Add a bushing and a washer
    • Preliminarily tighten the 15mm nut by hand
    • Raise the wheel with a floor jack to simulate riding positions
    • Hold the upper stabilizer link stud with a 16mm socket and ratchet
    • Tighten the upper nut to the stabilizer link with a 15mm socket and ratchet
    • Hold the lower stabilizer link stud with a 15mm socket and ratchet
    • Tighten the lower nut to the stabilizer link 16mm socket and ratchet
  4. step : Reattaching the Wheel (4:14)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 16mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2005Ford Explorer Ford Explorer Rear Sway Bar Link Driver or Passenger Side
2003-2005Lincoln Aviator Lincoln Aviator Rear Sway Bar Link Driver or Passenger Side
2002-2005Mercury Mountaineer Mercury Mountaineer Rear Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00222


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:09 min)