Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 51760-3K003, 517603K003
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:16)
    • Attach the wheel lock key to the locking lug nut
    • Loosen the lug nuts with a breaker bar with the wheel on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:19)
    • Apply rust penetrant to the sway bar link bolts
    • Break loose the 17mm nut on the top of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the top sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the top of the sway bar link
    • Thread the 17mm nut partially onto the top stud
    • Break loose the 17mm nut on the bottom of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the bottom sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the bottom of the sway bar link
    • Thread the 17mm nut partially onto the bottom stud
    • Pull out the bottom sway bar link stud
    • Remove the nut from the top sway bar link stud
    • Pull out the top sway bar link stud
  3. step : Installing the Sway Bar Link (7:01)
    • Remove the 18mm nuts from the new sway bar link
    • Put the sway bar link into place
    • Start the two 18mm nuts onto the sway bar link
    • Counter hold the top ball joint with an 18mm wrench
    • Tighten the top 18mm nut
    • Counter hold the bottom ball joint with an 18mm wrench
    • Tighten the bottom 18mm nut
    • Tighten the two 18mm nuts to 56 foot-pounds of torque
  4. step : Installing the Wheel (9:02)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds of torque

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Its a sway bar link
Its a sway bar link. It fit my 09 MDX. perfectly. Quality seems good. Time will tell.
April 1, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2013Acura MDX Acura MDX Front Sway Bar Link Driver or Passenger Side
2010-2013Acura ZDX Acura ZDX Front Sway Bar Link Driver or Passenger Side
2006-2015Honda Pilot Honda Pilot Front Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00205


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)